User`s manual

Lake Shore MTD Series Cryotest System User’s Manual
Options, Accessories, & Cables 6-7
ACCESSORIES (CONTINUED)
MODEL DESCRIPTION OF ACCESSORY
1705
Horizontal Cradle Mount Assembly. The heavy duty, horizontal cradle mount assembly securely
clamps the MTD unit in a horizontal, side-looking position. Construction is 12.7 cm (0.5 inch)
aluminum plate with black-anodized finish. Compatible with all MTD Models; standard with the
Model MTD-158.
1710
Gimbal Base Assembly. Pivots an MTD system on the gimbal’s horizontal support axis for
placement in a down-looking, up-looking, or horizontal orientation. Construction is 12.7 cm
(0.5 inch) aluminum plate with black-anodized finish. Compatible with Models MTD-140 and
MTD-150 (10-inch diameter dewars).
1711
Gimbal Base Assembly. Same as the Model 1710 but compatible with Models MTD-144, -154,
and -158 (12-inch diameter dewars).
1810
Blackbody Source/Chopper Wheel Assembly. The 1810 is a blackbody source and chopper
wheel assembly. It is available for installation on all MTD Systems. Arrangement and dimensions
may vary according to individual customer requirements.
8271-21M
MTD Instrumentation Cable Assembly. This cable assembly is used to interconnect any MTD
System with a Lake Shore Model DRC-82C, -91C, -91CA, -93, or -93CA Temperature Controller.
The cable consists of laboratory-quality, twisted, shielded cable and is 2.74 meters (10 feet) in
length.
8271-30M
MTD Instrumentation Cable Assembly. This cable assembly is used to interconnect any MTD
System with a Lake Shore Model 320 or 330 AutoTuning Temperature Controller. The cable
consists of laboratory-quality, twisted, shielded cable and is 2.74 meters (10 feet) in length.
9001-00X
Lake Shore Cryogenic Wire. Lake Shore sell the following types of cryogenic wire: DT = Duo-
Twist™, MN = Single Strand, MW = Manganin, NC = Nichrome Heater, ND = Heavy Duty, QL =
Quad-Lead™, and QT = Quad-Twist™. Please refer to the Lake Shore Catalog for wire details.
9004-020
Apiezon
®
“N” Grease, 25 gram Tube. General purpose grease well-suited for cryogenic use
because of its low viscosity. It is often used as a means of thermally anchoring cryogenic sensors
as well as lubricating joints and o-rings. Contains high molecular weight polymeric hydrocarbon
additive which give it a tenacious, rubbery consistency allowing the grease to form a cushion
between mating surfaces.
9005-014
19-Pin Vacuum Feedthrough Connector Without Flange. See Figure 6-1.
9005-015
Mating Connector for 9005-014 and 9005-016 19-Pin Vacuum Feedthrough Connectors.
Hardware for attaching connector to a Customer-supplied cable is included. See Figure 6-3.
9005-016
19-Pin Vacuum Feedthrough Connector With Flange. See Figure 6-2.
9005-017
Mating Adapter for Mounting P/N 9005-016. Used for mounting a P/N 9005-016 in 3/8 inch
(0.53-mm) NPT Male Thread. See Figure 6-4.
9007-002
Indium Foil (5 Pieces). Indium is a semi-precious non-ferrous metal, softer than lead, and
extremely malleable and ductile. It stays soft and workable down to cryogenic temperatures. May
be used as a sealing gasket for covers, flanges, and windows in cryogenic applications.
DRC-91CA
Model DRC-91CA Temperature Controller. The Lake Shore Model DRC-91CA is a temperature
controller mainframe featuring analog controls. Please consult the Lake Shore Product Catalog
for configuration, option, and accessory details.
DRC-93CA
Model DRC-93CA Temperature Controller. The Lake Shore Model DRC-93CA is a
temperature controller mainframe featuring digital controls. Please consult the Lake Shore
Product Catalog for configuration, option, and accessory details.