User`s manual

ManualsBrandsMTD ManualsLawn and Garden350 series

Lake Shore MTD Series Cryotest System User’s Manual

LIMITED WARRANTY

Lake Shore Cryotronics, Inc. (henceforth Lake Shore), the manufacturer, warrants this product to be free from

defects in material and workmanship for a period of twelve (12) months from the date of shipment. During the

warranty period, under authorized return of instruments or component parts to Lake Shore freight prepaid, the

company will repair, or at its option replace, any part found to be defective in material or workmanship, without

charge to the Owner for parts, service labor or associated customary shipping cost. Replacement or repaired

parts will be warranted for only the unexpired portion of the original warranty.

All products are thoroughly tested and calibrated to published specifications prior to shipment. Calibration

Certifications are offered for six month periods only. Where such documentation must be updated, a

re-certification service is offered by Lake Shore at a reasonable cost.

LIMITATION OF WARRANTY

This warranty is limited to Lake Shore products purchased and installed in the United States, or Internationally

through our approved distribution agents. This same protection will extend to any subsequent owner during

the warranty period. It does not apply to damage caused by accident, misuse, fire, flood, or acts of God, from

failure to properly install, operate, or maintain the product in accordance with the printed instructions provided.

This warranty does not apply to defects resulting from improper or inadequate maintenance, unauthorized

modification or misuse, operation outside of the environmental specifications for any product or part or buyer-

supplied software interfacing.

This warranty is in lieu of any other warranties, expressed or implied, including merchantability or fitness for a

particular purpose, which are expressly excluded. The owner agrees that Lake Shore’s liability with respect to

this product shall be set forth in this warranty, and incidental or consequential damages are expressly

excluded.

CERTIFICATION

Lake Shore certifies that this product has been inspected and tested in accordance with its published

specifications and that this product met its published specifications at the time of shipment. The accuracy and

calibration of this product at the time of shipment are traceable to the United States National Institute of

Standards and Technology (NIST); formerly known as the National Bureau of Standards (NBS).

TRADEMARK ACKNOWLEDGMENT

Many of the designations used by manufacturers and sellers to distinguish their products are claimed as

trademarks. Where those designations appear in this manual and Lake Shore was aware of a trademark

claim, the designations have been printed in initial capital letters and the ™ or

symbol used.

Apiezon

is a trademark of Biddle Instruments

CalCurve™, Carbon-Glass, Cernox™, Duo-Twist™, Gamma-Probe, Quad-Lead™, Quad-Twist™,

and SoftCal™ are trademarks of Lake Shore Cryotronics, Inc.

Cryo-Gloves

is a trademark of Tempshield

Ladish

Flange is registered by the Ladish Co., Inc.

Swagelok

is a trademark of the Swagelok Company

Teflon

is a trademark of DuPont De Nemours

portion of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise, without the express written permission

of Lake Shore.