Specifications

Blade Control
Blade Depth
Control Lever
(Transport
Position
Shown)
Recoil Starter
Belt Guard
Figure4-1:The maincomponentson theedger.
,_ WARNING:Befamiliar with all controlsand
their properoperation. Know how to stop
the machineand disengage them quickly.
NOTE: Referto the Engine Manualpackedwith your
edger for a detailed description of all engine-related
controls and components.
Recoil Starter
The recoilstarteris usedto startthe engine.
Primer
The primeris usedto pumpgas into thecarburetorand
aidin startingtheengine.Useit to start a coldengine,
but donot useit to restarta warmengineaftera short
shutdown.Referto theEngineManualpackedwithyour
edgerfora detaileddescriptionofall engine-related
controlsandcomponents.
Blade Control
Locatedon the upperhandle,the bladecontrolmustbe
depressedagainstthe upperhandlein orderto operate
the unit.Releasingthe bladecontrolstopsthe engine
andthe edgerblade.
Blade DepthControl Lever
The bladedepthcontrolleverislocatedon the rightside
of the upperhandle.It is usedto controlthe depthof the
cut. Thefurtherforwardthe bladedepthcontrolleveris
moved,the deeperintothe soil the edgerbladewill cut.
Bevel Adjustment Lever(if soequipped)
The beveladjustmentlever,if soequipped,is located
on thefront, leftportionof the edger,behindthe edger
blade.It is usedto varythe angleof theedgerblade
betweenoneof threepositionsfor edging/trenchingor
bevelededging.
Curb Height Adjustment Lever (ifsoequipped)
The curbheightadjustmentlever,ifso equipped,is
foundon the rearportionof the edger.Whenplacedin
an applicablenotch,it aidsin stabilizingthe edgerwhile
edginggrassalonga curb.
IMPORTANT:Becomefamiliarwithall the controls
beforeoperatingtheedger.
7
WARNING
Be familiar withall
controlsand their proper
operation.Know how to
stop the machine and
disengage them quickly.
Referto the Engine
Manualpackedwith
your edger for a detailed
description of all engine-
related controtsand
components.