Manual

f
IdlerPulleyRod
Belt Keeper
Bracket
EnginePulley
Figure 8-1
• Removethe beltkeeperbracketlocatedbehindthe
enginepulleyby removingtwohex boltsandlock
washers.See Figure8-1.
• Removebeltand reassemblenew belt.Follow
instructionsinreverseorder.
NOTE: Uponreassembly,makecertainthe beltis
routedoverthe idlerpulleyandinsideof belt keepersby
enginepulley.SeeFigure8-1.
Off-Season Storage
Ifthetillerwillnotbeusedfora periodlongerthan30days,
thefollowingstepsshouldbetakentopreparethetillerfor
storage.
• Cleantheexteriorof engineand theentiretiller
thoroughly.Lubricatethe tillerasdescribedinthe
lubricationinstructions.
• Wedo not recommendthe use of pressurewashers
to cleanyourunit.Theymaycausedamageto
electriccomponents,spindles,pulleys,bearingsor
the engine.The useof pressurewasherswill result
in shortenedlifeand reduceserviceability.
• Referto the enginemanualforcorrectengine
storageinstructions.
• Wipetineswithoiledragto preventrust.
Storetillerin a clean,dry area. Donot storenextto
corrosivematerials,suchas fertilizer.
NOTE-Whenstoringanytypeof powerequipmentinan
unventilatedormetalstorageshed,careshouldbetaken
to rustprooftheequipment.Usingalightoilorsilicone,coat
theequipmentandespeciallyanysprings,bearings,and
cables.
13
When storingany type
of powerequipment
in an unventilatedor
metalstorage shed,
care should be taken
to rustproof the
equipment. Using a
light oil or silicone,
-oat the equipment and
especially any springs,
bearings, and cables.
NOTE: specificationsare
subject to changewithout
notificationorobligation.
Images mynot reflectyour
exact modelandarefor
referencepurposeson!y,