Specifications

Version 2.0
217
A.3.3.1.1 Example
usb(0,1) Æ a1
usb(1,0) Æ b0
A.3.3.2 Floppy Devices
General consistent mapping rule
Use _UID for CSD
A.3.3.2.1 Examples:
1.
acpi(pnp0604,0) Æ a
2. acpi(pnp0604,1) Æ b
3. IDE Devices
A.3.3.3 CSD of ATAPI device path node
ATAPI node Æ ide channel index
0 for primary, master, 3 for secondary slave
A.3.3.4 CSD of LUN Device path node
Use the LUN number
A.3.3.4.1 Examples:
USB(0x2,0x1)/Unit(0x0) Æ c10
USB(0x2,0x1)/Unit(0x2) Æ c12
A.3.3.5 CSD of SAS Device path node
Use the SAS Address, followed by the LUN number, Device Topology Value, and
Relative Target Port
A.3.3.6 CSD of SATA Device path node
Use the HBA Port Number, followed by the Port Multiplier Number, and the LUN value.
A.3.3.7 CSD of hard drive device path node
Hard disk node - > partition number
Formatted: Bullets and Numbering