Instruction manual

Mettler Electronics Corp. — Rev.M_11/19/14
20
8
Press this button to start traction. Press again the output force will be
released.
9
Control knob — To increase or decrease the value of a setting. (Clockwise→
Increase; Anti-clockwise→ Decrease.)
10
The column shows the actual output value during the treatment.
11
When the device starts to increase the pulling strength, the PULL indicator
lights.
12
When the device starts to decrease the pulling strength, the RELEASE
indicator lights.
13
Lb / Kg indicator: The force units being used on the device.