OPERATOR’S MANUAL TRACTOR SNOW CAB Model Number 190-751-OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTION CAREFULLY. MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U.S.A. FORM NO.
RULES FOR SAFE OPERATION Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. 1. This cab provides foul weather protection only. It does not provide protection against exhaust fumes, collision, rollover or other accidents. 2. Read the snow cab and vehicle owner's manuals and know how to operate your vehicle before using the snow cab attachment. 3.
SHOWN FULL SIZE A B C D E F H I J G K NOT SHOWN FULL SIZE L REF. A B C D E F G QTY. 1 2 4 8 2 8 2 M DESCRIPTION REF. Hex Bolt, 5/8” x 1-3/4” Carriage Bolt, 5/16 x 2" Hex Bolt, 1/4 x 1-1/2" Hex Bolt, 5/16” x 1” Shoulder Bolt Lock Washer, 5/16” Flat Washer, 5/16” H I J K L M N 3 QTY.
TOOLS REQUIRED FOR ASSEMBLY ASSEMBLING THE BASE (2) (2) (1) (2) 7. Assemble the drawbar bracket to the base assembly using four 5/16” x 1” hex bolts, 5/16” lockwashers and 5/16” hex nuts. See figure 3. 8. Attach the tool bracket to the base assembly using four 5/16” x 1” hex bolts, 5/16” lockwashers and 5/16” hex nuts. See figure 3. 7/16" Wrenches 1/2” Wrenches 3/4” Wrench 15/16” Wrenches REMOVAL OF PARTS FROM TRACTOR 1. Remove any rear mounted attachments which may be installed on your tractor 2.
STANDARD FRAME TRACTORS 10. Hook the base assembly under the shoulder bolts in the adapter brackets using the second notch in the base assembly. Align the hole in the bottom of the base assembly with the hole in the tractor drawbar. Insert the 5/8” x 1-3/4” hex bolt and secure it with the 5/8” hex nut. See figure 5. 1/4" x 1-1/2" HEX BOLT SUPPORT ROD 1/4" HEX LOCK NUT 1/4" HEX LOCK NUT 1/4" x 1-1/2" HEX BOLT FIGURE 7 5/8" x 1-3/4" HEX BOLT 15.
17. Assemble two spiral hooks into holes on top of u-tube at front of tubing frame. See figure 9. 18. Insert ends of rope down through spiral hooks attached to u-tube and then insert ends through two grommets in front of canopy. See figure 9. OPERATING THE SNOW CAB Read this owner's manual and safety rules before operating your tractor with the Snow Cab. CAUTION: Watch out for low tree limbs and other overhead objects which may interfere with the snow cab.
REPAIR PARTS FOR MODEL 190-751-OEM TRACTOR SNOW CAB 5 3 3 4 16 12 17 17 11 2 6 2 10 9 8 1 15 25 13 24 14 19 20 17 22 18 26 17 21 20 19 21 18 26 7 REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 64717 25014 25013 25012 25015 48895 25141 43720 44977 43081 43648 43013 25190 25189 QTY.
If you are having difficulty assembling this product or if you have any question regarding the controls, operation or maintenance of this unit, please call the Customer Support Department.
