Specifications

19
(c) Limit Switches:
A qualified electrician should perform this inspection.
Check correct operation of the limit switches. Clean tho
roughly and apply a thin lubrication
to ensure correct operation.
(3) Annual inspection
(a) Check gearing for any excessive wear or damage.
(b) Replace gearbox lubricant completely.
(c) Check brake lining and ratchet pawl for any wear or damage.
(d) Check operation of pawl spring.
(e) After reassembly of above check, lifting a load several times to ensure good
performance of the hoist before starting duty operation.
Your dealer should be asked to perform this inspection.
φ190 BUCKET SPECIFICATIONS
Key No.
Bucket
No.
Chain
Size
Chain length (M) Bucket Size (mm) Material
200781 6 ψ10 < 8.8
190 × 190 × 310L
canvas
200782 7
ψ10
8.8 - 20.8
190 × 190 × 440L
canvas
200783
8
ψ10 21 - 30.8
190 × 190 × 560L canvas
200784
8-1 ψ10
21- 26.8 M
340 × 210 × 495 × t2 steel
200785 9
ψ10 27 - 38.8 M 400 × 210 × 605 × t2
steel
200786 10
ψ10
39 - 47.8 M
400 × 210 × 695 × t2
steel
200781 6
ψ11.2 < 8.8 190 × 190 × 310L canvas
200782 7
ψ11.2 8.8 - 18.8 190 × 190 × 440L canvas
200783 8
ψ11.2 19 - 27.8 190 × 190 × 560L canvas
200784 8-1 ψ11.2
< 19M 340 × 210 × 495 × t2
steel
200785
9 ψ11.2 19.8 - 31 M
400 × 210 × 605 × t2 steel
200786 10 ψ11.2 32 - 40.8 M
400 × 210 × 695 × t2
steel