Specifications

Chapter 6 Setting up parameters
- 93 -
● Operations of values
(1) To change a value, press the [ADJ] key at least 0.1
second.
⇒1st digit [0] flickers. You can change the value.
(2) Change the value with the keys of [UP] and [DOWN].
The [UP] key increases the value.
The [DOWN] key decreases the value.
(3) To define the new value, press the [SET] key at least
0.1 second.
⇒The value is stored in the memory. From now on,
the new value is effective.
(4) To cancel a change in operation and to make the
previous value effective before defining, press the
[ADJ] key at least 0.1 second.
⇒The previous value is restored.
D O W N U P A D J S E T
Changing
While 1st digit code
flashes, you can
change the value.
D O W N U P A D J S E T
Press 0.1 sec.
D O W N U P A D J S E T
Setting new value
D O W N U P A D J S E T
Canceling
Press 0.1 sec.
Press 0.1 sec.
1st digit 6th digit