Specifications

Chapter 6 Setting up parameters
- 85 -
[Monitor mode]
Torque Monitor (position / speed mode)
● Function
This indicates current output torque of the actuator in “%”
where “100%” corresponds to the maximum torque.
● Details of display
1st digit: [5: Torque monitor]
2nd digit: No indication means positive counts, and [-]
indicates negative counts.
3rd digit: No indication
4th to 6th digit: Indicates current output torque in “%”
where “100%” corresponds to the
maximum torque.
Overload rate (position / speed mode)
● Function
This indicates current overload rate of the actuator in “%.”
The rate is determined by the overload protection
characteristics of the motor.
If the value reaches [100], the overload protection function
shuts off the motor current, and issues an [Alarm 20].
● Details of display
1st digit: [6: Overload rate]
2nd to 3rd digit: No indication
4th to 6th digit: Indicates the current [overload rate] in “%”
where “100%” is equal to the [overload
protection characteristics] of the motor.
D O W N U P A D J S E T
Torque monitor
Current output torque
where “
1
00%”
corresponds to the maximum torque
Unit: %
(ex.) Torque = 20%
1st digit 6th digit
D O W N U P A D J S E T
Overload rate
The current overload rate
where
“100%” is equal
to the [overload
protection characteristics] of the
motor.
Unit: %
(ex.) Overload rate=20%
1st digit 6th digit