Specifications

Chapter 5 Operations
- 77 -
(31) To change a value, press the [ADJ] key at least 0.1
second.
⇒The first digit [0] flashes. You can change the value.
(32) Change the value with the [UP] key and the [DOWN]
key.
The [UP] key increases the value.
The [DOWN] key decreases the value.
(33) To define the new value, press the [SET] key at least
0.1 second.
⇒The value is stored in the memory. From now on,
the new value is effective.
(34) To cancel the changing operation and to make the
previous value effective before, press the [ADJ] key at
least 0.1 second.
⇒The previous value is restored.
(35) To terminate the [tune mode] and to return to the
[monitor mode], press the [SET] while the [End] is
indicated.
⇒ The indication mode then returns to the [monitor
mode].
5-1-4 End of test run
When above operations are finished, terminate the test
run.
(36) Shut the power (OFF).
D O W N U P A D J S E T
Changing
While the first digit
code flashes, it is
able to change value.
D O W N U P A D J S E T
Press 0.1 sec.
D O W N U P A D J S E T
Setting new value
D O W N U P A D J S E T
To previous value
Press 0.1 sec.
Press 0.1 sec.
D O W N U P A D J S E T
Tune mode
Monitor mode