Specifications

Chapter 5 Operations
- 75 -
(20) Press [UP] or [DOWN] key to change the
functional items of the parameter mode.
(21) To change a value, press [ADJ] key at least 0.1
second.
⇒The first digit [0] flashes. You can change the value.
(22) Change the value with the [UP] key and the [DOWN]
key.
The [UP] key increases the value.
The [DOWN] key decreases the value.
(23) To define the new value, press the [SET] key at least
0.1 second.
⇒The new value is stored in the memory, and
becomes effective.
(24) To cancel the changing operation and to make the
previous value effective before defining, press the
[ADJ] key at least 0.1 second.
⇒The previous value is restored.
(25) To terminate the [parameter mode] and to return to
the [monitor mode], press the [SET] key while the
[End] is indicated.
⇒ The indication mode then returns to the [monitor
mode].
A D J D O W N U P S E T
Function selection
D O W N U P A D J S E T
Monitor mode
D O W N U P A D J S E T
Changing
While the first digit
code flashes, you
can change the
value.
D O W N U P A D J S E T
Press 0.1 sec.
D O W N U P A D J S E T
Setting new value
D O W N U P A D J S E T
Canceling
Press 0.1 sec.
Press 0.1 sec.