Specifications

Chapter 5 Operations
- 71 -
(2) Turn on main power via the host, and transmit [ON]
signal to [CN2-3 servo-ON] from the host.
⇒Turns the servo drive circuit active, and current can
flow to the actuator.
◆ JOG operation of the actuator
(3) To enter the [test mode] from the [monitor mode],
press the [SET] key at least three seconds.
⇒Indicates 6th to 4th digit in the order, and enters the
[test mode] when there is no indication on 4th to 6th
digit.
(4) Indicate [Jo] pressing the [UP] key or the [DOWN] key.
(5) To enter in the [JOG operation] mode, press the [ADJ]
key at least 0.1 second.
⇒The first digit [J] flashes.⇒ You can operate the
actuator.
(6) To operate the motor forward, press the [UP] key.
⇒The motor will rotate when the key is pressed, and
will stop when the key is released.
(7) To operate the motor reverse, press the [DOWN] key.
⇒The motor will rotate when the key is pressed, and
will stop when the key is released.
(8) To exit from the [JOG operation] mode, press the
[SET] key at least 0.1 second.
⇒ Flashing of the first digit [J] stops, servo turns OFF,
and the [JOG operation] mode terminates.
D O W N U P A D J S E T
JOG
operation
CW
forward
CCW
reverse
Turns on servo to
operate the motor.
D O W N U P A D J S E T
D O W N U P A D J S E T
Turns servo OF
F.
The [JOG operation]
mode terminates.
A D J
D O W N U P A D J S E T
D O W N U P S E T
Monitor mode
Press 3 sec.
Test mode