Specifications

Chapter 4 Installing the HA-655 driver
- 58 -
4-2 Notices on handling
The HA-655 drivers are electronic devices. Handle them with care and take the following precautions:
(1)
Because
the case is made of plastic, do not apply excess
force or shock.
(2) The vibration resistance of the HA-655 driver is 4.9m/s
2
(1
0 to
55Hz). Do not mount or transport the HA-
655 driver in a
manner where it would be subjected to high levels of
vibration.
(3) Do not put the HA-655 driver on the place from where
it can
easily fall down.
(4) Do not put anything on the HA-655 driver. The case of
the
driver may break.
(5) Do not drop screws, solder balls, wire chips, or any
other
foreign objects through the ventilation gaps of the HA-
655
driver.
(6) Do not insert electric wire, steel wire, or a screwdriver
through the ventilation gaps of the HA-655 driver.
(7) Handle the terminal cover carefully. Do not use the HA-
655
driver without the terminal cover.
Failure to observe this
caution may result in electric shock or personal injury.
(8) The allowable storage temperature is from −20℃ to ＋85℃
.
Do not expose it to sunlight for long periods of
time, and do
not store it in
areas where temperatures are likely to
fluctuate greatly.
(9)
The allowable storage relative humidity is less than 95%. Do
not store it in highly humid place or in
areas where
temperatures are likely to fluctuate greatly.
(10) Do not store the HA-655 driver in areas where
in corrosive
gas or particles may be present.
CAUTION