Specifications

Chapter 6 Setting up parameters
- 115 -
6-7-2 Functions of the test mode
JOG operation (position / speed mode)
● Function
Pressing [UP] or [DOWN] key rotates the motor with the
speed of [1:JOG speed].
● Details of display
1st and 2nd digit: [Jo: JOG operation]
3rd to 6th digit: No indication
● Operations
(1) To transfer to in [JOG operation] mode, Press the
[ADJ] key at least 0.1 second.
⇒1st digit [J] flashes and servo turns ON.
⇒JOG operation is available.
(2) To operate the motor forward, press the [UP] key.
⇒The motor will rotate when the key is pressed, and
will stop when the key is left.
(3) To operate the motor reverse, press the [DOWN] key.
⇒The motor will rotate when the key is pressed, and will stop when the key is released.
(4) To exit from [JOG operation] mode, press the [SET] key at least 0.1 second.
⇒ Flashing of 1st digit [J] stops, servo turns OFF, and [JOG operation] mode terminates.
● Related functions
[JOG speed]: [test mode]→[SP: JOG speed]
[JOG acceleration]: [test mode]→[Ac: JOG acceleration]
Before JOG operation, make
sure load conditions and motor/
encoder cable installations are
correct.
Activating JOG operation mode turns
servo ON. Improper
load and poor cable
installation can result in accidents
that
may cause physical injury and fire.
CAUTION
D O W N U P A D J S E T
JOG
operation
CW
forward
CCW
reverse
Turns on servo to
operate the motor.
D O W N U P A D J S E T
D O W N U P A D J S E T
Turns servo OFF.
[JOG operation] is
unable.
1st digit 6th digit