Technical data

i-KI(R) MTD
INDEX
Waiver of liability
This document cannot be considered comprehensive for the purposes of: installation, operation, precautions against risks, handling
and transport. See the “General installation manual” for further information.
This document refers to standard configurations, in particular regarding dimensions, weights, electrical, refrigerant, water and air duct
connections (where applicable). For further information, drawings and diagrams contact the Climaveneta Sales Office.
Climaveneta accepts no liability deriving from the incorrect use of this document.
This publication is the sole property of Climaveneta, all reproduction, even partial, is prohibited.
The data contained in this publication may be changed without prior notice.
HFC 410Ai-KI(R)_MTD_0031_201110_EN
2
This company participates in the Eurovent Certifi cation Programme.
The products are listed in the Directory of certifi ed products.
Eurovent certifi cation applied to units with cooling capacity up to 1500 kW
for air cooled water chillers and water cooled liquid chillers.
Company quality system
certified to UNI EN ISO 9001
and environmental certification
UNI EN ISO 14001
1. DESCRIPTION OF THE UNIT 3
2. ELECTRONIC CONTROLLER 5
3. OPERATING CHARACTERISTICS 6
4. ACCESSORIES 11
5. GENERAL TECHNICAL DATA 24
6. OPERATING LIMITS 28
7. ETHYLENE GLYCOL MIXTURE 29
8. FOULING FACTORS 29
10. MINIMUM AND MAXIMUM SYSTEM WATER CONTENT 30
10. SYSTEM PUMP CURVES 31
11. UTILITY WATER CIRCUIT CONNECTION DIAGRAM 31
12. FULL LOAD SOUND LEVEL 32
13. POSITION OF THE WATER CONNECTIONS 32
14. DIMENSIONAL DRAWINGS 33
15. CLEARANCES - HOISTING - SYMBOLS 33
16. OPERATING DIAGRAMS 34