Specifications

ANALEXfdMplus
in remote locations where full
laboratory analysis is not possible.
Samples may be presented for
measurement using a variety of
sample apertures, offering you full
 exibility of use. Ferrous debris is
measured directly from the oil or
grease in the sample container,
providing a quick, simple, and
clean method of analysis.
Data from each test is stored in
the internal memory, which may
then be transferred to a host PC
via a RS232 interface. Data can
then be fully analyzed and trends
easily monitored by importing into
a database.
The ANALEXfdMplus is a highly
accurate instrument designed
to measure ferrous wear metal
particle contamination in an
oil sample. The ANALEXfdMplus
utilizes a unique sample adaptor
system to measure from any of
the following sample sources:
• 50ml Bottle
• 10ml Syringe
• 5ml Syringe
• 5ml Test Tube
• 4ml Grease Pots
The ANALEXfdMplus measures
ferrous wear debris in oil or grease
samples taken from a variety
of types of machinery. Suitable
for  eld and laboratory use, the
ANALEXfdMplus provides the
ability to successfully monitor
equipment, preventing costly
machinery downtime.
Contained in a fully portable case,
it’s rugged design is ideal for
testing and analyzing oil samples
both in the laboratory, or in the
 eld. Supplied with an optical
12 V convertor, it is ideal for use
Data Entry
Data entry is via a simple and
intuitive touch pad screen, with
full alphanumeric keypad and
backlit graphics display, for clear
user prompts and easy viewing of
results. The following parameters
can be recorded:
• Automatic date and time linked
to each equipment or sample
number.
• Equipment number or
identi cation.
• Sample number or identi cation.
• Lubricant hours (0 - 999999 hrs).
The results are shown in a tabular
display and in graphical format
to enable trending by machine or
equipment number.
Measurement Range
(approx. PPM)
50ml Bottle: 0 - 2500ppm
10ml Syringe: 0 - 19000ppm
5ml Syrings: 0 - 34000ppm
5ml Tube: 0 - 28000ppm
4ml Grease Pot: 0 - 8000ppm
Display Resolution 1 ppm
Sample Sources
50ml Sample Bottles, 10ml Syringes, 5ml
Syringes & Test Tubes, 4ml Grease Pots
Test Time
< 1 minute to stabilize from power on
< 15 seconds per sample
Power 110 - 250 VAC autoselected 50/60 Hz
Fuse Rating 2.5 A 250 VAC HRC A/S T ceramic
Operating Temp. Range 60°F - 104°F (15°C - 40°C)
Weight 9.30 lb (4.22 kg)
Speci cations
The ANALEXfdMplus is a highly accurate ferrous debris monitor designed to
measure ferrous wear metal particle contamination in an oil sample.
Sample Aperture
Sample Sensor
Anti-Glare
Touch Screen
Range of Sample
Adaptors
Part Number Quantity Description
FGK17144PA
1 Includes calibration and check standards, power
adaptor, RS232 connector, sample adaptors, and
a range of sample sources.
FGK14946PA 360 50ml Sample Bottles
FGK15005PA 3000 Grease Pots
FGK17074PA 1000 5ml Test Tubes
FGK17075PA 500 10ml Syringes
FGK17076PA 500 5ml Syringes
FGK17725PA 360 50ml Sample Bottles with Grease Thief Starter
Pack & Calibration Standards
Ordering Information
62