Specifications

icountLCM20
Features & Benefits
Test time: 2 minutes
Particle counts: MTD 4+, 6+, 14+, 21+,
38+ and 70+ microns(c)
ACFTD 2+, 5+, 15+, 25+,
50+ and 100+ microns
International codes: ISO 7-22, NAS 0-12
Data retrieval: Memory access gives
test search facility
Max. working pressure: 6000 psi (420 bar)
Max. flow rate: 106 GPM when used
with system 20 Sensors.
Higher with single point
sampler
Working conditions: LCM will operate with the
system working normally
Computer compatibility: Interface via RS232
connection @ 9600 baud
rate.
Special ‘diagnostics’ are incorporated into the
icountLCM microprocessor control to ensure
effective testing.
Routine contamination monitoring of oil systems
with icountLCM saves time and saves money.
Contamination monitoring is now possible during
applicaton operation - icountLCM saves on
production downtime.
Data entry allows individual equipment test log
details to be recorded.
Data retrieval of test results from memory via hand
set display.
Automatic test cycle logging of up to 300 tests can
be selected via hand set display.
Totally portable, can be used as easily in the field
as in the laboratory.
Automatic calibration reminder.
Instant, accurate results achieved with a 2 minute
test cycle.
Data entry allows individual equipment footprint
record.
Data graphing selectable via the integral printer.
Auto 300-test cycle logging via LCD handset input.
RS232 to USB computer interface.
Limit level output to control peripheral equipment
such as off-line filtration via internal relay limit
switches.
Auto-testing allows for the conducting of
automatic sequencing tests on flushing systems
for example.
Optional bar code swipe wand to allow handset
data loading.
Worldwide service and technical support.
Re-calibration - Annual certification by an
approved Parker Service Center.
Typical Applications
Construction machinery
Industrial plant
Hydraulic equipment & system
manufacturers
Research & testing institutes
Offshore & power generation
Marine
Military equipment applications
2