Specifications

icountMS Range
Features and Benefits
Typical Applications
Ground support vehicles
Pulp and paper plants
Marine hydraulics
Power transmission &
distribution
Forestry
Industrial hydraulics
Earth moving applications
Agricultural
Hazardous Areas (Zone II)
Simulators
Continuous, online moisture indication, for
hydraulic and lubricating systems.
Reporting of % relative humidity of water
content, giving the user information on how
close to the fluids real saturation point.
Reliable data on the rate of water absorption.
Sensing cell technology using a laser trimmed
thermoset polymer, for capacitive sensing that
is capable of absorbing water molecules due
to its micro porous structure.
Uses a thermistor for temperature
compensation correction. Offering total
confidence in reporting the %RH relative
humidity over the sensors temperature range.
A purpose designed tee adaptor allows for
easy installation into an existing fluid system.
The MS200 can also be specified with a
bench top wand offering the end user greater
flexibility.
In-Line Moisture Measurement of Hydraulic
& Lubricating Fluids.
Parkers Moisture Sensor Range offers fast, reliable and accurate
in-line detection of moisture in fluids. The MS transducer type
technology has been especially designed with the preventative
maintenance programme environment in mind.
The industry accepted sensing cell device will monitor and report
Relative Humidity (RH), moisture content in oils. The water content
measurement technique offers the end user benefits over the
current standard form of water content reporting (PPM).
This allows for real time preventative maintenance to be
undertaken and corrective actions to be made. By knowing that
the water contamination is still within the oils absorbing range, less
than 100%, reclaiming fluid properties before additive damage
occurs can initiate calculable cost savings.
53