Specifications

50
icountOS
Specifications
Feature Specifi cation
Product start-up time 10 seconds minimum
Measurement period Default 30 seconds run time; 15 seconds data logging time
Reporting interval Onboard data storage every second. Output via RJ45 connection
Principle of operation Laser diode optical detection of actual particulates
International codes range Up to ISO 22 (+/- 1 ISO code) NAS 0-12
Calibration Calibration by recognized online methods con rmed by the relevant ISO procedures.
MTD – via a certi ed primary ISO 11171 automatic particle detector using ISO 11943
principles. Particle distribution reporting to ISO 4406:1999
Recalibration and Servicing Recommended every 12 months
Working pressure 35-5000 psi (2.5–350 bar) Pressures above 35 psi require the use of a Parker
Pressure Reducing Valve (PRV) – ACC6NN027
Working viscosity 1-300 cSt
Flow range through IOS 40–140ml/minute; controlled at 60ml/min by IOS’s internal pump
Fluid connection interface INLET: .236 inch (6mm) push- t. DRAIN: .157 inch (4mm) push- t
Ambient storage temperature for unit –40ºC to +80ºC; –40ºF to +176ºF
Operating temperature for unit –30ºC to +80ºC; –22ºF to +176ºF
Operating humidity range 5%RH to 100%RH
Fluid operating temperature (Oil) +5ºC to +80ºC; +41ºF to +176ºF
Fluid operating temperature (Fuel) –20ºC to +70ºC; –4ºF to +158ºF
Moisture sensor Linear scale within the range 5%RH to 100%RH
Computer compatibility IP68-rated RJ45 connection that may be connected to a laptop computer’s RJ45
LAN port using the 2m cable supplied
Power requirement Regulated power supply supplied with the unit
Certi cation IP54 rating (unit open)
IP67 rating (unit closed)
EC Declaration of Conformity
Machinery Directive
EMC EN61000-6-3:2001
EMC EN61000-6-2:2001
EMC EN61010-1:2001
CE Certi ed
Important Information
WARNING-USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND
PROPERTY DAMAGE.
– This document and other information from Parker-Hanni n Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users
having technical expertise.
– The user, through their own analysis and testing, is solely responsible for making the  nal selection of the system and components and assuring that all performance, endurance,
maintenance, safety and warning requirements of the applications are met.
– The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other
materials provided from Parker or its subsidiaries or authorized distributors.
– To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or speci cations provided by the user, the user is responsible
for determining that such data and speci cations are suitable and suf cient for all applications and reasonably foreseeable uses of the components or systems. The operation of the
products described here in is subject to the operating and safety procedures details of which are available upon request.
Sales conditions
The items described in this document are available for sale by Parker Hanni n Corporation, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be
governed by the provisions stated in Parker’s standard terms and conditions of sale (copy available upon request).
What is included?
Of ine IOS 1210 EUR/UK/US Online IOS 1220 EUR/UK/US
1x IOS Oil Sampler Unit 1x IOS Oil Sampler Unit
+ 1x Power Supply + 1x Power Supply
+ 1x RJ45 LAN Cable + 1x RJ45 LAN Cable
+ Low Pressure Hoses + 1x Low Pressure Hose
+ 1x PRV
+ 1x High Pressure Hose