Specifications

For use in explosive
and hazardous areas
The icountPD Particle Detector
from Parker represents the most
up to date technology in solid
particle contamination analysis.
This compact, permanently
mounted laser-based ATEX
approved particle detector
module is designed for use in
Zone II areas and is housed in
a robust Stainless Steel IP69K
approved enclosure that provides
a cost effective solution to fluid
management and contamination
control.
Product Features:
• Independent monitoring of
system contamination trends.
• Assembled in an approved
and certified Stainless Steel
enclosure to comply with ATEX
Directive 94/9/EC.
• Can be used in explosive and
hazardous areas.
• ATEX Zone II.
• Certified to CE Ex II 3GD,Ex nA
IIC T4 Gc,Ex tc IIIC Dc SIRA
09ATEX4340X and IECEx SIR
09.0137X (-30°C<Ta<+60°C).
• Moisture & %RH indicator
(optional).
• Warning limit relay outputs
for low, medium and high
contamination levels.
• Continuous performance for
prolonged analysis.
• Self diagnostic software.
• Full PC/PLC integration
technology such as:- RS232
and 0-5Volt, 4-20mA,
CAN(J1939) (Contact Parker for
other options.
• Set up and Data logging
support software included.
icountPDZ
ATEX Approved Online Particle Detector
38