Specifications

icountBS Product Specifi cation
Principle of Operation Laser based light obscuration
Dimensions H=20.9” x W=7.48” (8.27” Door) x D=16.1”
Weight 31 lb. (14kg)
Mechanical Composition Stainless steel 316, plated mild steel and aluminum
Plastics Composition Precision polyurethane RIM moldings and ABS plastic
Environmental Operating Temperature
(Tested)
41°F to 140°F (+5°C to +60°C)
Operating RH Range 20 - 85% [Tested at 86°F (30°C), no condensation]
Storage Temperature 40°F to 194°F (-40°C to +90°C)
Storage RH Range 10 - 90% (Tested at 30°C, no condensation)
Channel Sizes
MTD - >4(c), >6(c), >14(c), >21(c), >38(c), >70(c), ACFTD - >2, >5, >15,
>25, >50, >100
Analysis Range ISO 7 to 21, NAS 0 to 12
Contamination Standards
MTD - ISO 4406:1999 & NAS 1638 ACFTD - ISO 4406:1987, ISO 4406:1991, NAS
1638, and jAS4059E
For further contamination standards consult Parker
Calibration Standard
ISO MTD and ACFTD calibration to traceable ISO Standards. (Contact Parker for
further details)
Fluid Management Maximum single sample = 100ml, Minimum single sample = 10ml
Possible Test Confi gurations
User selectable from single test up to 5 tests per run (eg. 1 x 100ml up to 5 x 50ml
per run)
Pre-Test Flush Volume Minimum = 10ml, Maximum = 100ml
Viscosity Range 5 to 400 cSt
Fluid Compatibility
Mineral oils, petroleum and hydrocarbon based  uids. For all other  uids, consult
factory.
Sample Bottle Size
No speci c bottle required. Maximum size = 2.95” (Dia.) x 5.90” (H). Maximum
volume = 250ml
Memory Storage 500 tests (capacity warning after 450 tests)
Output Display Backlight 256 color STN transmissive
Output Display Resolution 320 x 3 (RGB) (H) x 240 (W) dots
Display Active Area 115 (H) x 86 (W) mm
Data Input Via icon driven resistive touch screen
Printer Thermal dot-line printing
Printer Paper Ø50mm - (57mm x 25mm)
Test Certifi cation Calibration & Certi cate of Conformity
Power Supply
DC output - 12V @ 6.60Amps, 80 watts max. AC input - 100 to 240V @ 1.2Amps (50
- 60 Hz)
Battery Power 2 hours (recommended to be fully charged every 3 months)
Battery Stand-By Time 1 month (then 1 hour of operation)
Battery Fuse 6.3 Amps (anti-surge)
Air Pressure Source 50 psi (3.5 bar) internal mini-compressor or 101 psi (7 bar) shop air
21