Condition Monitoring Products & Custom Solutions
The Parker Hannifin Filtration Group assures: Hydraulic, Lubrication & Coolant Filtration High-performance filtration systems for production machinery in industrial, mobile and military/marine. Consistent quality Technical innovation Premier customer service Compressed Air & Gas Filtration Parker’s technical resources provide the right filtration technologies that conform to your requirements.
Content icountLCM20 Contamination Monitor........................................................ 1 icountACM20 Lab Unit and icountACM20Z............................................. 7 Universal Bottle Sampler...........................................................................13 icountBS2 Bottle Sampler..........................................................................17 Single Point Sampler.................................................................................
Introduction Parker Hannifin is comprised of eight global groups: Aerospace, Climate & Industrial Controls, Fluid Connectors, Seal, Hydraulics, Filtration, Automation and Instrumentation. The Filtration Group consists of ten technical sales and service locations: Finite Filter, Hydraulic Filter Division North America, Hydraulic Filter Division Europe (two locations), Process Filter, Racor, Parker Hannifin Brazil and Parker Hannifin Korea.
icountLCM20 Fluid Condition Monitoring Portable Particle Counter A portable particle counter designed to be used in the field icountLCM20 is a proven answer to fluid system contamination monitoring. Multi-standard ISO and NAS cleanliness reporting, data entry, data graphing and integral printing are all standard on this world proven contamination monitor. Product Features • icountLCM20 is a proven answer to fluid system contamination monitoring. • 2-minute test procedure.
icountLCM20 Features & Benefits Test time: 2 minutes Particle counts: MTD 4+, 6+, 14+, 21+, 38+ and 70+ microns(c) ACFTD 2+, 5+, 15+, 25+, 50+ and 100+ microns International codes: ISO 7-22, NAS 0-12 Data retrieval: Memory access gives test search facility Max. working pressure: 6000 psi (420 bar) Max. flow rate: 106 GPM when used with system 20 Sensors.
icountLCM20 Specifications Automatic Particle Counters (APC), have been widely used for many years in condition monitoring of hydraulic fluids. However, it is only recently that APCs have become flexible enough to enable the instruments to be taken out of the laboratory and used on-line in order to obtain the most credible form of results.
icountLCM20 Portable Particle Counter Specification Description LaserCM LaserCM (LCM20 20 22) (LCM20 20 62) 4.96 (126mm) ABS structural foam and injection moulded case ABS handheld display Mechanical composition – Brass, plated steel, stainless steel and aluminium Fluorocarbon seals Nylon hoses (kevlar braided microbore) Stainless steel armoured hose ends 1.2m fluid connection hose 1.26 (32mm) Rechargeable battery pack 12Vdc power supply Fast blow fuse Unique optical scanning system 9.80 (249mm) 1.
icountLCM20 Portable Particle Counter Why On-Site Fluid Contamination Monitoring? Certification of fluid cleanliness levels. Early warning instrument to help prevent catastrophic failure in critical systems. Immediate results with laboratory accuracy. To comply with customer cleanliness requirements and specifications. New equipment warranty compliance. New oil cleanliness testing. Data Download Management Dedicated software, provides the link between an icountLCM20 and your computer management system.
icountLCM20 Portable Particle Counter Introducing the new icountLCM ‘Classic’ There is a new addition to the proven range – the icountLCM ‘Classic’. Only available from Parker, the ‘Classic’ retains all the technology that made the icountLCM one of the most accurate, reliable and popular portable particle counters available. Classic icountLCM20 Our design engineers have re-configured the icountLCM specification in a way that has reduced our manufacturing costs.
icountACM20 Lab Unit Aviation Fuel Contamination Monitoring DEFSTAN 91-91 Issue 6 Jet A-1Fuel Specification, adopts particle counting. The first fully functional particle counter approved for use on aviation fuel. After 5 years of development work carried out by Parker UK and partner, the ACM20 has passed all technical barriers and is now approved for aviation fuel quality per DEFSTAN 91-91 Issue 6. Parker has consistently provided technically superior products to all fluid conditioning applications.
icountACM20/icountACM20Z Features & Benefits Test Time: 2 minutes Operating Temperature: +41°F to +176°F (+5°C to +80°C) Repeat Test Time: Every 2 minutes (Manual testing), every 6 minutes (automatic) Memory store: 300 test capacity Principle of Operation: Optical scanning analysis and measurement of actual particles and inference to water presence Computer compatibility: Interface via RS 232 connection @ 9600 baud rate (USB serial cable to RS232 option available) Primary Output: ≥4μ(c), ≥6μ(c), ≥14μ(
icountACM20 Lab Unit icountACM20 - rear view Transfer Pump Flush Button Specifications Construction: ABS structural foam and injection moulded case Hand-held display - ABS Keypad flurosilicone rubber Mechanical Components: Brass, plated steel, stainless steel and aluminium Fuse: 1.
icountACM20Z ATEX Approved Portable Particle Counter For use in explosive and hazardous areas icountACM20Z is designed to be used to monitor various fuels from existing sampling points in hazardous locations such as refineries, pipelines, distribution terminals, airport fuel supply systems all the way through to the point of uplift into aircraft. Product Features: • Assembled in an approved and certified stainless steel enclosure to comply with ATEX Directive 94/9/EC.
icountACM20Z Specifications Construction: Unit: Stainless Steel Carrying case: ABS Hand-held display: ABS Keypad: polyester membrane Mechanical components: Brass, plated steel, stainless steel and aluminium Seals: Fluorocarbon Hoses: Nylon (Kevlar braided microbore) Fluid compatibility: All fuels. For other fluids consult Parker Internal rechargeable battery: Note: ONLY to be charged outside of the hazardous area, with the unit switched off Fuse: 1.
icountACM20Z ATEX Approved Portable Particle Counter Installation Details 14.6 (370mm) 11.8 (300mm) 11.0 (280mm) dimensions in inch (mm) 13.
Universal Bottle Sampler Simple and efficient offline oil sampling Ideal for batch oil sampling The UBS provides the dynamic link to portable particle counters. The UBS off-line sampler has microprocessor technology to recognize and adjust to the connecting monitor including the icountLCM20.
Universal Bottle Sampler Specifications Description UBS Offline Viscosity range 2 to 250 cSt X Operating temp. 41°F to 176°F (+5°C to +80°C) X Test time 2m15s / 4m15s (Flush 2m) X 12 Vdc power supply X Extruded aluminium construction X Unit weight - (lb.) 8.
Universal Bottle Sampler Simple and Efficient Offline Oil Sampling System Flow Rate Samples are best taken from a point in the system where the flow is TURBULENT (Reynolds No. greater than 4000). The turbulent flow creates a mixing action. Where flow is streamline or LAMINAR, larger particulate may tend to settle toward the lower pipe surface and not be sampled.
Universal Bottle Sampler Ordering Information Standard products table Part Number Description UBS9002 Mineral Oil Universal Bottle Sampler/mineral oil (includes aluminium case and accessories) UBS9005 Agressive Fluid Universal Bottle Sampler/aggressive fluid (Includes aluminium case and accessories) Accessories Part Number Supersedes Description ACC6NK001 B89907 Sample bottle (2/pack) ACC6NW001 B89911 Sample bottle with extraction hose (2/pack) ACC6NW002 B89910 Sample bottle with extracti
icountBS - Bottle Sampler The benchtop solution to fluid contamination bottle sampling 17
The Complete Solution - Industrial Design Combined with State of the Art Technology The icountBS - Bottle Sampler from Parker, with its innovative industrial design, has been developed for customers looking for state of the art technology, attention to detail and the compactness of a permanent laboratory particle analysis instrument.
Home Screen Sample ID Input Number of Sample Runs Sample Volume Flush Volume Start Test 19
Analyzing the Test Results Once the automatic oil sample test has been completed, what next? Solid contaminants in fluid power systems vary in size, shape, form and quantity. The most harmful contaminants are normally between 6 microns and 14 microns. The ISO code is the preferred method of reporting quantity of contaminants. The ISO code number corresponds to contamination levels relating to three sizes.
icountBS Product Specification Principle of Operation Laser based light obscuration Dimensions H=20.9” x W=7.48” (8.27” Door) x D=16.1” Weight 31 lb.
icountBS - Bottle Sampler Ordering Information Part Number IBS3000 (offline/online) IBS3100 (offline only) Accessories Part Number Included 250ml Sample Bottle (2 per pk) ACC6NW001 * (1 pk) Sample Bottle Pack (50) ACC6NW002 (2 pks of 50) Vapour/Waste Bottle ACC6NW003 * Waste Bottle Folder ACC6NW004 Printer Paper Reel (x1) ACC6NW005 * P893865 * 1m Waste Tube (Clear) ACC6NW009 * 1m Vapour Hose (Blue) ACC6NW010 * USB Memory Stick ACC6NW011 * icountBS CD Manual ACC6NW012 * P.
Single Point Sampler Online Sampling The effective link to ensure accurate contamination monitoring mineral based fluids The SPS (Single Point Sampler) is a lightweight, compact and easy to use online sampling unit that connects an icountLCM20 to a single pressure test point in a fluid system. Suitable for use with mineral and biodegradable oils, petroleum based and phosphate ester fluids, the SPS offers fingertip operated control even at high pressures - 6,000 PSI (420 bar) rated maximum pressure.
Single Point Sampler Features & Benefits The Single Point Sampler provides a means to connect an icountLCM20 to a single pressure test point and balance the differential pressure across the system, to provide a controlled flow of oil into the icountLCM20 and away into a waste oil receptacle. Suitable for fluid temperatures from +5°C to +80°C (+41°F to +176°F) High quality polished finish.
Single Point Sampler Specifications Fluid Compatibility: Mineral oil and petroleum based fluids Phosphate ester fluid For other fluids consult factory Seals: Fluorocarbon or Perfluoroelastomer 4.84 (123mm) Maximum Working Pressure: Weight: 500 grams max. (Not including hoses) SWP 6,000 psi Unit Size: 2.09 (53mm) 6,000 PSI (420 bar) 1.77in dia x 4.8in long (45mm dia x 123mm long) System Connection: 3.
System20 Inline Sensors & Monitors Effective in-line system sensors and monitors In-line System20 sensors and hand-held monitors designed to give accurate and instant fluid system readings of flow, pressure and temperature. 3 sizes of inline System20 sensor for pressures up to 6,000 PSI (420 bar), an analog monitor that utilizes 3 day-glow gauges with protective cover. EM20 electronic monitor with full digital display and 300 test memory. Product Features • 2 types of System20 sensor are available.
System20 Features & Benefits Covering a wide range of flow rates, fluid types and applications, Parker’s System 20 sensors are designed to be used with System 20 electronic or analog monitors, icountLCM, icountPD and the. Specially developed System20 sensors are available for use with phosphate ester fluids (EPDM Seals). System20 monitors, combined with the inline sensor, give the user accurate and instant readings of flow, pressure and temperature without the need for costly system downtime.
System20 Specifications: Sensors Mobile Industrial Construction: Industrial: (STI) Body: 303 SS Internal components: SS and Brass Mobile: (STS) Body: 303 SS Internal components: Cast Aluminium and SS Flow Capacities: All suitable for use with oil, water and oil/water emulsion Size 0: 0.5-7 GPM (6-25 l/min) Size 1: 5-26 GPM (20-100 l/min) Size 2: 21-100 GPM (80-380 l/min) Max.
System20 Electronic Monitor Specification Construction: A sealed assembly requiring no routine maintenance or adjustment. Body molding in ABS. Key pad molded in silicon rubber. The monitor is suitable for use with all mineral oils, water and oil/water emulsions. Temperature Section: Temperature reading between 14°F to 230°F (-10°C and +110°C). Display Details Data Logging: Each test logs the following data: Test number; time & date; sensor size; media tested; flow rate, pressure & temperature.
System20 Analog Monitor Construction: A sealed assembly requiring no routine maintenance or adjustment. Body moulding in ABS. The monitor is suitable for use with all mineral oils, water and oil/water emulsions. The monitor has 3 dayglo dial gauges and features a protective hinged cover. When the system is in reverse flow or when the high pressure lines to the sensor have been transposed, a ‘below zero’ indication is given.
icountPD Online Particle Detector 31
icountPD The icountPD from Parker represents the most up-to-date technology in solid particle detection. 3 Versions Available Standard icountPD is designed for test stand, flushing skids, filter carts and other industrial applications. icountPDR is designed for mobile equipment or any outside use other than hazardous environment. icountPDZ is intended for applications that require a Zone II safety such as off-shore platforms or any other hazardous environment.
icountPD/icountPDR/icountPDZ Diagnostic self check start-up time 5 seconds Measurement period 5 to 180 seconds Reporting interval through RS232 0 to 3600 seconds Digital LED display update time Every second Limit relay output Changes occur +/- 1 ISO code at set limit (Hysteresis ON) or customer set (Hysteresis OFF) 4-20mA output signal Continuous Principle of operation Laser diode optical detection of actual particulates Reporting codes ISO 7 – 21, NAS 0 – 12, (AS 00 – 12 contact Parker) Icou
icountPD Dimensions / Installation Details 0.8” (21) 7.2” (182) 4.3” (110) Supply and Limit Relay Cable 2.4” CTRS (60 CTRS) 0.6” (16) 1.5” (37) 1.9” (49) 3.4” (86) Communications Cable 2 mounting locations to suit M5 socket head cap screw. (Screw pack supplied with icountPD) 2.0” (52) icountPD flange thickness = 0.4” (10mm) 6.
icountPD Variable mA Output Settings The following table can be used to equate the analog output for channels A, B, and C independently. Example: ISO code 12 is equal to 10mA. mA 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 Milliamp Output 20.0 18.0 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 0.
icountPD Display Parameters (ISO 4406/NAS 1638) Digital display indication The digital display will show the actual measured codes, the channel (μ) size and the user defineable limits. Visible display of the channel size and user definable limits will alternate.
icountPD Auxiliary Flow Device This simple to use flow control device fits on the downstream (outlet) side of the icountPD and is fitted with a differential pressure valve that adjusts the system flow to a range inside the icountPD specifications. The flow control device will operate correctly between 150 psi (10.3 bar) and 2900 psi (200 bar) and the return back to an open system of 0 psi (0 bar) (DP = 2900 psi, 200 bar).
icountPDZ ATEX Approved Online Particle Detector For use in explosive and hazardous areas The icountPD Particle Detector from Parker represents the most up to date technology in solid particle contamination analysis. This compact, permanently mounted laser-based ATEX approved particle detector module is designed for use in Zone II areas and is housed in a robust Stainless Steel IP69K approved enclosure that provides a cost effective solution to fluid management and contamination control.
icountPD Ordering Information BOX 1 BOX 2 BOX 3 BOX 4 BOX 5 BOX 6 BOX 7 BOX 8 IPD 1 2 2 2 2 1 30 BOX 5: Limit Relay Symbol Description BOX 1: Basic Assembly Symbol Description IPD Standard Particle Detector IPDR Particle Detector - Robust Construction IPDZ Particle Detector - Hazardous (Zone 2) 1 Mineral Oil 2 Phosphate Ester (iPD, iPDR only) Aviation Fuel (4 channel) (iPD, iPDZ only) Yes 2 RS232 / 4-20mA 3 RS232 / 0-5V (iPD, iPDR only) 5 RS232 / CAN-bus (J1939) BOX 7: Moisture
Notes 40
icount Oil Sampler (IOS) Portable Condition Monitoring for Hydraulic Oil and Fuel Systems 41
Accurate Condition Monitoring made Quick, Simple and Cost Effective The icountOS (IOS) is an innovative solution to the challenge of measuring the quality of hydraulic oils and hydrocarbon fuels in many different applications: from renewable energy, marine and offshore, to manufacturing, mobile, agriculture, military and aerospace.
Wherever, Whenever you need to be 100% sure of Oil and Fuel Quality With its robust carrying case, sealed to IP67, and proven laser and diagnostics technologies, the IOS is the perfect tool for maintenance and plant engineers to use with all fixed and mobile plant and machinery. IOS technology is proven in many different applications, under the most demanding conditions, and is used by leading companies around the world.
icountOS How It Works The IOS quality condition monitor for hydraulic oils and hydrocarbon fuels uses advanced technology to produce extremely repeatable results. At the heart of the system is a sophisticated laser detector, using a light obscuration flow cell, providing continuous measurement of fluid flow passing through a sample tube.
icountOS dimensions are in mm (inches) Low Pressure Connection Setup We recommend that the IOS is positioned in a safe, stable area, as close as possible to the system output and only the hose fittings provided are used. Option 1 Option 2 High Pressure Connection Setup (Optional equipment needed) (High pressure is defined for this unit as more than 2.
icountOS Features Proven Laser Detecton Technology The IOS uses light obscuration, light blockage technology. A light source is projected through a moving column of oil or fuel. Contaminants in the fluid interrupt the light beam, casting images on a photo diode cell, where the resulting change in light intensity produces a directly proportional change in electrical output.
Quick Connection Connecting the IOS is quick and reliable. The fluid connectors are on the front panel, with two secure push fittings: .236” diameter (6mm) inlet and .157” diameter (4mm) outlet/drain. Parker can supply dedicated hoses and fittings for use with most hydraulic and hydrocarbon fluids. Tough Storm Case The robust waterproof IP54 (when open) case and fully sealed impact resistant brushed stainless steel front panel provide excellent protection in the most demanding of applications.
icountOS Web Interface The IOS is a unique product in that it has its own web page generator which means that the stored data can be downloaded or viewed on any PC or laptop. Utilizing a computer’s Internet Explorer utility, simply plug in the supplied network cable, open Explorer and enter the IOS’s unique IP/MAC address. Home Page Key 1. Product description 2. Key features 3. Register the product at 1 www.parker.com/unlock 2 3 Data Log Page Key 1. Start and Stop data logging 2.
icountOS Web Interface Unit Status Page 1 Key 1. The Unit Status page is a list of current values for various parameters for the connected IOS unit. Configuration Page Key 1 1. Alarm limit settings for: - 4μm channel - 6μm channel - 14μm channel 2. Alarm limit setting for Relative Humidity 3. Measurement period 4. Data logging interval 5. Unit name 6. Unit location 2 3 4 5 6 Configuration: Set Report Standard Page 1 Key 2 1. Select either the ISO4406:1999 or NAS1638 standard. 2.
icountOS Specifications Feature Specification Product start-up time 10 seconds minimum Measurement period Default 30 seconds run time; 15 seconds data logging time Reporting interval Onboard data storage every second. Output via RJ45 connection Principle of operation Laser diode optical detection of actual particulates International codes range Up to ISO 22 (+/- 1 ISO code) NAS 0-12 Calibration Calibration by recognized online methods confirmed by the relevant ISO procedures.
icountOS How To Order Key Fluid Type Calibration Connection Options IOS1220EUR Mineral MTD Online No options IOS1210EUR Mineral MTD Offline No options Key IOS Fluid Type 1 Mineral 3 Aviation fuel (4 channels*) Calibration 2 MTD Connection 1 Offline 2 Online 0 Options Region No options UK EUR USA *Fluid Type 3: Contact Parker Hannifin Accessory Part Numbers Description Hose Kit Bag (includes one power pack, RJ45 patch cable and low pressure hose connectors) Part number ACC6NN
icountMS Range Moisture Sensors Fast, reliable and accurate inline detection of moisture in fluids MS moisture sensors provide fast, reliable and accurate inline detection of moisture in fluids. Technology developed for preventative maintenance programmes. MS200 is the ‘Programmable’ sensor monitoring and reporting relative humidity (RH), moisture content in oils. MS300 ‘Intrinsically safe’ sensor ATEX certified for use in hazardous Zone 0 environments.
icountMS Range Features and Benefits Continuous, online moisture indication, for hydraulic and lubricating systems. Reporting of % relative humidity of water content, giving the user information on how close to the fluids real saturation point. Reliable data on the rate of water absorption. Sensing cell technology using a laser trimmed thermoset polymer, for capacitive sensing that is capable of absorbing water molecules due to its micro porous structure.
MS200 Moisture Sensor Specifications % Saturation Calibration Accuracy: Temperature Calibration Accuracy: Thermal Stability: Stability: Linearity: Analog Output Hysteresis: Switched Output Hysteresis: Operating Temperature Range: Operating Humidity Range: Response Time: Maximum Rated Pressure: Maximum Torque: Seal Material (depending on MS): Material: Connector Details: Maximum Cable Length: Output: +3% RH ±1°C ±1% RH (over compensated temperature range +10 to +80°C) ±0.
MS300 Intrinsically Safe Specifications Pressure: (MAOP): 6,000 PSI (420 bar) Operating temperature: Minimum: -40°F (-40°C) - dependent on seal material Maximum: +185°F (+85°C) Flow through sensor cell: Installed in active flowstream Fluid compatibility: Mineral oils, petroleum-based and Phosphate esterSkydrol option available Viscosity range: Unlimited Thread form connections: See ordering information Developed in association with Triteq Ltd. 4.17-4.21 (106-107mm) 2.24 (57mm) Ø26.0 .945 (24mm) Ø.
Moisture Sensor Displays Specifications Bar Graph Indicator (PBG8341A) Construction: Housing – nylon 6/6, window – acrylic, Alternative Indicator bezel/board supports – ABS, Description DDU1001 DDU1002 pins – phosphor bronze Power supply 11 - 30 Vdc 110 - 240 Vdc Power supply: Accuracy ± 0.1% typical ± 0.1% typical 11 – 30 Vdc Sample rate 2.5 per second 2.5 per second Signal input: (By dipswitch configuration) Operating temp (°C) 0 - 50 0 - 50 Off – differential up to 5V A – single signal (Ref.
Ordering Information MS200 - Product Configurator Key MS Model 2 Programmable Fluid Type Output Options Thread Forms Connector Future Option 1 0 2 Mineral 01 0 -3 Vdc 1 G 1/4” BSP Bonded Seal 6 Aggressive 02 0 - 5 Vdc 2 G 1/4” BSP Integral Seal 03 1 - 6 Vdc 3 R 1/4” Taper 04 4 - 20 mA 4 1/4” NPT Taper 5 9/16 - 18 UNF 2A Integral Seal 6 Hand Held Unit 7 G 3/8” BSP Female Swivel Equal T Adaptor M12 8 Way No MS300 - Product Configurator Key MS Model 3 Programmable Fluid
Oilcheck Hand-held Oil Condition Monitor Portable and battery powered for ‘goanywhere’ monitoring Hand-held condition monitor provides a visual comparison between new and used oils Parker’s Oilcheck is completely portable and battery powered with a numerical display that indicates positive or negative increase in dielectrics. Oilcheck gives an early warning of impending failure and the simplistic hand-held design makes it easy to use.
Oilcheck Features & Benefits Using Oilcheck • A comparator between new and used oils. • Oilcheck gives early warning of impending failure. • Cost effective solution to save money and help improve system reliability. • Completely portable, battery powered. • Ideal for reliability, engineers, and maintenance personnel. • Numerical display to show positive or negative increase in dielectrics. Following the simple sampling procedure. Parker’s Oilcheck will ensure effective and highly repeatable results.
Oilcheck Specifications Using Oilcheck Case construction: ABS Circuitry: Microprocessor control Battery: 1 x 9V alkaline (supplied) Display: LCD Suitable oil types: Mineral and synthetic based oils Repeatability: Better than 5% Readout: Green/amber/red grading, Numerical value (0-100%) Battery lifetime: >150 hours or 3,000 tests Dimensions: 9.8” x 3.7” x 1.3” (250mm x 95mm x 34mm) Weight: 0.
Kittiwake Condition Monitoring Products 61
ANALEXfdMplus The ANALEXfdMplus is a highly accurate ferrous debris monitor designed to measure ferrous wear metal particle contamination in an oil sample. The ANALEXfdMplus is a highly accurate instrument designed to measure ferrous wear metal particle contamination in an oil sample.
DIGI Field Kit The DIGI Field Test Kit gives fast, accurate results for water in oil, total base number, total acid number, insolubles (soot), and comparitive viscosity. Total Acid Number (TAN) Testing for TAN is essential to maintain and protect your equipment, preventing damage in advance. Both the weak organic and strong inorganic acids present within an oil can be measured with the TAN test. A rise in TAN is indicative of oil oxidation due to time or operating temperature.
Low Range DIGI Water Kit The DIGI Test Cell provides simple, accurate results for water in oil.
Heated Viscometer Make fast on-site maintenance decisions with Parker’s Heated Viscometer. Accurate oil viscosity results in minutes. The Parker Heated Viscometer provides a condition monitoring tool that enables you to make informed operational and maintenance decisions about your critical plant and equipment. Fuel and lubricating oils form a major cost element in the operation of almost all industrial machinery and engines; the quality must be closely monitored to protect the investment.
MHC Bearing Checker Parker’s MHC* Bearing Checker is a new, unique hand-held instrument, providing maintenance engineers with an easy-to-operate, simple to use, and quick method of analyzing bearing condition and lubrication state. The MHC Bearing Checker monitors high frequency Acoustic Emissions (AE) signals naturally generated by deterioration in rotating machinery. The unique way of detecting and processing these signals provides conditionrelated information in the easiest possible form.
Guide to Contamination Standards This guidebook is aimed at engineers, technicians and quality control personnel involved in contamination control. Its purpose is to make available accepted and widely-used cleanliness specification levels for liquid samples. The tables in this guide allow users of using automatic portable particle counters to see the relationship between raw particle counts at various sizes and the reporting code numbers of various contamination standards.
ISO Cleanliness Code Hydraulic Fluid Contamination Number of particles per ml ISO code number More than Up to and including 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 20,000 10,000 5,000 2,500 1,300 640 320 160 80 40 20 10 5 2.5 1.3 0.64 40,000 20,000 10,000 5,000 2,500 1,300 640 320 160 80 40 20 10 5 2.5 1.
Suggested Acceptable Contamination Codes ISO code numbers Type of system Typical components Sensitivity 23 / 21 / 17 Low pressure systems with large clearances Ram pumps Low 20 / 18 / 15 Typical cleanliness of new hydraulic oil straight from the manufacturer.
NAS 1638 Table The NAS 1638 cleanliness standard was developed for aerospace components in the US and is still widely used for industrial and aerospace fluid power applications. The figures are differential counts, and the NAS class is usually reported as a single figure representing the maximum allowed particle counts (i.e. worst case) for designated particle size ranges.
SAE AS4059 rev E Table Note that this standard is technically identical to ISO 11218.
GOST 17216-2001 Table The GOST standard is developed by the Technical Committee of Standardization TK 184 “Ensuring Industrial Cleanliness” introduced by the Government of Russia. Adopted by the Inter-governmental Committee of Standardization Metrology and Certification (Protocol No. 19 dated 24 May 2001).
NAV AIR 10-1A-17 Table The Navy Standard for Hydraulic Fluids used for aircraft hydraulic systems is defined in the Aviation Hydraulics Manual (1989), Table 2-1, Navy Standard for Particulate Cleanliness.
ISO/NAS/SAE Code Comparison Table The comparisons relate to particle count data only. To conform to any particular standard, reference should be made to the recommended experimental procedure.
Offer of Sale The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors (“Seller”) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions.
Offer of Sale The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors (“Seller”) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions.
Notes
Notes
Parker Hannifin Corporation About Parker Hannifin Corporation Parker Hannifin is a leading global motion-control company dedicated to delivering premier customer service. A Fortune 500 corporation listed on the New York Stock Exchange (PH), our components and systems comprise over 1,400 product lines that control motion in some 1,000 industrial and aerospace markets. Parker is the only manufacturer to offer its customers a choice of hydraulic, pneumatic, and electromechanical motion-control solutions.
Worldwide Filtration Manufacturing Locations North America Europe Asia Pacific Compressed Air Treatment Compressed Air Treatment Australia Filtration & Separation/Balston domnick hunter Filtration & Separation Haverhill, MA 978 858 0505 www.parker.com/balston Gateshead, England +44 (0) 191 402 9000 www.parker.com/dhfns Castle Hill, Australia +61 2 9634 7777 www.parker.com/australia Finite Airtek Filtration Airtek/domnick hunter/Zander Parker Gas Separations Lancaster, NY 716 686 6400 www.parker.
