Technical data

4. ACCESSORIES
The accessories listed below are supplied separately.
METAL MESH WATER FILTER
This filter MUST be installed on the heat pump return pipe to
trap any impurities in the water circuit that may damage the
unit’s heat exchanger.
VIBRATION DAMPERS
Used between the heat pump and the support plane.
Vibration dampers made from rubber, elastomer and aluminium
alloy casing for fastening to the floor.
i-KI(R) MTD
11
HFC 410Ai-KI(R)_MTD_0011_0061_201307_EN
Characteristics
Body Brass
Finish Sanded
Body gasket Betaflex 71
Thread ISO 228/1
Filter
AISI 304 stainless steel micro-perforated
sheet metal
Hole pitch 2 mm
Inscribed hole diameter 500 micron
Number of holes per cm
2
80
Dimensions
DN 32 40 50
R inch 1 1/4 1 1/2 2
L mm 96 106 126
H mm 68 75 90
Pressure drop
R inch 1 1/4 1 1/2 2
Kv 17 24,5 36