Specifications

Valve Clearance

Valve Clearance (Cold) * ±.002 (.05 mm)

Engine Model Intake Valve Exhaust Valve

LAV35,50 .006" .006"

LEV80-120 (.004" - .008") (.004" - .008")

TVS75-120 .15 mm .15 mm

ECV & TNT100-120 (.10 - .20 mm) (.10 - .20 mm)

H30-35 & HS40-50

VLV40-6.75 .006"* (.15 mm) .006"* (.15 mm)

TVT (V-Twin) .004 (.10 mm) .004 (.10 mm)

TVM125-220

V & VH50-70

H & HH50-70 .010"* (.25 mm) .010"* (.25 mm)

HM70-100 & HHM80

OHSK80-130, OHM, OVM120

OVXL120 & OHV11-17 .004"* (.10 mm) .004"* (.10 mm)

HH100-120 .010"* (.25 mm) .020"* (.5 mm)

OH120-180 .005"* (.13 mm) .010"* (.25 mm)

OVRM40-6.75 .004"* (.10 mm) .004"* (.10 mm)

OHH/OHSK50-70

HSK60-70 .006"* (.15 mm) .006"* (.15 mm)

HMSK80-100

Valve clearance is checked with engine cold and piston at T.D.C. of compression stroke.

NOTE:If the valve spring has dampening coils, it should be installed with the dampening coils away from

the valve cap and retainers (opposite the keepers) or towards stationary surface.

DAMPENING COILS

LOCATED CLOSER

TOGETHER

THIS END TOWARD

STATIONARY SURFACE