Specifications

54
205 - 027C8194A0048
The recent warranty audit referenced in bulletin number “123” suggested we review the way our new
Tecumseh/Peerless
®
models are identified. The review found improvements were needed in the identification
system to make them standard with the new emission regulation’s requirements covering engine product
and the “New ESA 157 Claim Form”.
As a result, we have changed the product ID tag to make it easier to read. Should this data be needed for
service or warranty situations these improvements will make locating the needed model and specification
information easier.
Example Numbers 1 and 2 below, show the present bar code labels currently being used. We have identified
the important fields of information that is required for warranty claims.
In addition, a new easier to read bar code label (No. 3 below) is being introduced on all units provided after
October 1, 1998. Again we have highlighted the information you are required to supply.
This information is critical for prompt warranty reimbursement to your shop, please pay close attention to
this number.
SPECIFICATION NUMBER
REQUIRED FOR WARRANTY
SPECIFICATION NUMBER
REQUIRED FOR WARRANTY
SPECIFICATION NUMBER
REQUIRED FOR WARRANTY
MODEL NUMBER REQUIRED
FOR WARRANTY
MODEL NUMBER REQUIRED
FOR WARRANTY
MODEL NUMBER REQUIRED FOR
WARRANTY
D.O.M. (DATE OF MANUFACTURE)
ORIGINALLY SERIAL NUMBER
D.O.M. (DATE OF MANUFACTURE)
ORIGINALLY SERIAL NUMBER
D.O.M. (DATE OF MANUFACTURE)
ORIGINALLY SERIAL NUMBER
"NEW TYPE"
1 2
3
PEERLESS
PEERLESS
TECUMSEH
TECUMSEH
205 - 027C
MODEL DATE SERIAL
MST - 206 - 502A
DATE MFG. SERIAL NO.
6304A00013
PEERLESS
TECUMSEH
7070A - 0005
MODEL SPEC
D.O.M.
VST - 205 - 020C
Peerless Identification - continued