User manual

Page | 73
Note:
 The iwconfig wlan0 essid TIOP key s:abcde command indicates that the
connected wireless router name is TIOP, the KEY format is ASCII characters and
the KEY is “abcede”. Connection to the wireless router is "TIOP", if the key
format of WEP router used is hexadecimal characters and the key is:
0123456789, the WEP encrypted wireless router connect command is:
iwconfig wlan0 ESSID TIOP key 0123-4567-89
 Before the test, you must use the ifconfig wlan0 down to turn off the WiFi
device, use the ifconfig wlan0 up command to turn it on
 The DevKit8600 is unable to connect to a WiFi device that uses encryption more
complex than WEP
4. Testing
root@DevKit8600:~# ifconfig wlan0 192.192.192.216
root@DevKit8600:~# ping 192.192.192.90
PING 192.192.192.90 (192.192.192.90): 56 data bytes
64 bytes from 192.192.192.90: seq=0 ttl=64 time=32.260 ms
64 bytes from 192.192.192.90: seq=1 ttl=64 time=20.662 ms
5.8.15 BT Testing
1. Enable BT:
root@DevKit8600:~# insmod
/lib/modules/3.1.0/kernel/drivers/bt_enable/gpio_en.ko
Gpio value is :23
WL1271: BT Enable
2. Configure BT:
root@DevKit8600:~# hciattach /dev/ttyO3 texas 115200
Found a Texas Instruments' chip!
Firmware file : /lib/firmware/TIInit_7.2.31.bts
Loaded BTS script version 1
texas: changing baud rate to 921600, flow control to 1
Device setup complete
3. Testing：
root@DevKit8600:~# hciconfig hci0 up
root@DevKit8600:~# hcitool scan