Technical data

SightLine Applications Command and Control

Appendix: History

Changes for recent releases are summarized above.

2.06 (03)

• Change: Current Tracking Positions

2.07 (00)

• Change: Set ADC Parameters and Current ADC Parameters

• Change: Set Acquisition Parameters and Current Acquisition Parameters

• Change: Current Tracking Positions

• Change: Set Moving Target Detection Parameters and Current Moving Target

Detection Parameters

• New: Set Track Order, Get Track Order and Current Track Order

• New: Modify Tracking

• New: Modify Track by Index

• New: Limit Color Enhancement Parameter

2.08 (00)

• Change: Set Blend Parameters.

• Change: Set Stabilization Bias

• Change: Set Tracking Parameters

• Change: Set Blend Mode Description

• Change: Set Display Parameters

• Change: Current Display Parameters

• Change: Set Video Mode

• Change: Current Video mode

2.09 (00)

• Add: SD Card Recording Parameters

• Add: Current SD Card Recording Status

• Add: Current SD Card Directory Contents

• Add: Set Display Adjustments

2.10 (00)

• Add: new mode for Set Stabilization

2.12 (00)

• Change: Separate typedef in slfip.h for Commands and Responses

• Change: SetMetadataReportingMode → SetMetadataFrameValues

• Add: SetRGB565Conversion & DrawObject commands

• Change: SLFIPSetAVideoParameters cameraType → autoReset

2.13 (04)

• Add: Set Registration Parameters – zoomRange

• Add: Set Registration Parameters – ignore edge left, right, top, bottom

• Add: Auto reset video decoder option to Set Video Parameters

• Change: Corrected Current ADC Parameters

• Change: Set Network Parameters – reply port and reply mode added.

• Change: Current Stabilization Parameters - Return auto bias and black background

enabled parameters

• Add: Return of PIP stabilization disable in CurrentStabilizationParameters.

2.14 (01)

• Add RTP MJPEG Source option to Set Ethernet Display Parameters