Technical data

SightLine Applications Command and Control

Current Port Configuration (0x53)

Get Port Configuration (0x3F)

Format is the same as Configure Communication Port (0x3E).

Current Moving Target Indication Parameters (0x54)

Get Parameters Function (0x28) Set Moving Target Indication Parameters (0x2D)

Same as Set Moving Target Indication Parameters (0x2D), except that the length is only 7 with the

final “reserved” parameter removed.

Current H.264 Video Parameters (0x56)

Get Parameters Function (0x28) Set H.264 Video Parameters (0x23)

Format is the same as Set H.264 Video Parameters (0x23).

Current Display Parameters (0x57)

Sent in response to a Get Display Parameters (0x3A) command.

Format is the same as Set Display Parameters (0x16).

Current SD Card Recording Status (0x58)

Sent in response to Set SD Card Recording Parameters (0x1E) command.

Byte offset Description

2 Length = 11

3 Packet Type = 0x58

4 Recording State

1 Recording

2 Stopped

0x4 Network trace commands enabled (OR this bit)

0x8 Network trace telemetry enabled (OR this bit)

5 thru 8 Length of recording in seconds. Unsigned 32 bit integer

9 thru 12 Recording size in bytes.

Current SD Card Directory Contents (0x59)

Sent in response to Set SD Card Recording Parameters (0x1E) command. Based on the number of file