Technical data

SightLine Applications Command and Control

0 = no deinterlacing

1 = apply digital deinterlacing

10 Automatically reset video decoder when failed frame

unsynchronization detected

0 = Never

1 = When frame unsynchronization detected

Current ADC Parameters (0x47)

Get Parameters Function (0x28) Set ADC Parameters (0x18)

NEW: 2.18 This command now returns all the values that can be set using Set ADC Parameters. See

Set ADC Parameters (0x18) for packing order and description of the results.

Current Ethernet Video Parameters (0x48)

Get Parameters Function (0x28) Set Ethernet Video Parameters (0x1A)

Format is the same as Set Ethernet Video Parameters (0x1A).

Current Network Parameters (0x49)

Sent in response to a Get Network Parameters (0x1D) command. Format is the same as Set Network

Parameters (0x1C).

Current Video Enhancement Parameters (0x4A)

Get Parameters Function (0x28) Set Video Enhancement Parameters (0x21)

Describes the current video enhancement parameters. Under control of the Denoising parameter, a

running average of frames is optionally calculated. The denoised frame is then passed through one of

several filters to enhance contrast.

Byte offset Description

2 Packet length = 6

3 Packet type = 0x4A

4 Bits 0..3 Enhancement filter:

0 = None (default)

1 = CLAHE

2 = LAP

Bits 4..7 Sharpen level 0..15

5 Alpha blending term 0..255 (200 nominal):

0 = use input frame only

128 = 50/50 mix