Technical data

SightLine Applications Command and Control
Current System Type (0x65)
ADD Set Packet Destination (0x64)
Location where Telemetry data will be sent over the
network
MOD Version Number (0x40) Added application bits
ADD
Command Pass-through (0x3D)
Set SD Card Recording Parameters (0x1E)
Added ability to write user strings to an SD card log file.
ADD Configure Communication Port (0x3E)
Add attNav port setting.
Added TCP pass-through and Raw pass-through
modes.
2.17
MOD Set Stabilization Parameters (0x02) Color edge option in stabilization
ADD Parameter Block (0x6A) Get entire parameter set in human readable form.
MOD Modify Tracking (0x05) Optionally specify source image coordinates
MOD Set Video Mode (0x1F) Zoom to track picture-in-picture capability added
MOD Version Number (0x40) Added hardware type
MOD Reset (0x01) Added ability to clear parameters
MOD Do SnapShot (0x60) Added frame step and number of frames
MOD Set Registration Parameters (0x0E) Allow ignore edges to ignore more of the image
ADD Set Coordinate Reporting Mode (0x0B) Added get of this type
MOD Tracking Position (0x43)
Added frame-to-frame angle, scale and fractional offset
plus frame number
MOD Draw Object (0x3B)
Added optionally drawing a shadow for vertical and
horizontal lines.
2.16
MOD Set Ethernet Video Parameters (0x1A) Down Sample and Frame Step
MOD Set H.264 Video Parameters (0x23) Down Sample in Set Ethernet Video Parameters
MOD Set Video Mode (0x1F) Ignore number of network display output channels
ADD
Error: Reference source not found Set Metadata
Rate (0x62)
Set binary KLV blob to be sent with H.264
MOD Length field is expanded to 2-bytes. Support for longer packet, such as Set KLV Data
ADD Set SnapShot (0x5E), Do SnapShot (0x60) SnapShot functionality
ADD Set Acquisition Parameters (0x37) PAL video input and output support
ADD Draw Object (0x3B) FilledCircle and FilledRect types
2.15
ADD Set Moving Target Indication Parameters (0x2D) New parameters; increases packet length
ADD
Current Moving Target Indication Parameters
(0x54)
Reply changed; increases packet length
MOD Configure Communication Port (0x3E) Enum value change for port type
ADD Set H.264 Video Parameters (0x23) Configure H.264 ethernet video
ADD Current H.264 Video Parameters (0x56) Returned parameters for H.264 Ethernet video
ADD Set Overlay Mode (0x06) Ignore edge graphics
ADD Set Ethernet Display Parameters (0x29) Raw JPEG mode
Copyright © 2014-2015 SightLine Applications, Inc. Page 7 of 95 Jan 15, 2015