Technical data

SightLine Applications Command and Control

Current Stabilization Parameters (0x41)

Get Parameters Function (0x28) Set Stabilization Parameters (0x02)

Describes the current stabilization mode. See also Set Stabilization Parameters (0x02) and Set

Stabilization Bias (0x12) .

Byte offset Description

2 Packet length = 6

3 Packet type = 0x41

4 Mode (default 9)

Bit Description

0 – Stabilization OFF

1 – Stabilization ON

0 – Enable

1 - Disable all registration, stabilization, enhancement

and tracking

0 – Previous images background

1 - Black background

0 – Auto bias disabled

1 – Auto bias enabled

Bit 4– 6 Reserved

Bit 7 0 – Enable PIP image micro stabilization

1 – Disable PIP image micro stabilization

5 Screen re-centering rate 0..255 (default 50)

6 Limit – maximum stabilization offset in pixels. 0 = no limit.

(default 0)

7 Angle Limit – maximum stabilization rotation angle in degrees.

(default 0)

Current Overlay Mode (0x42)

Get Parameters Function (0x28) Set Overlay Mode (0x06)

Byte offset Description

2 Packet length = 5

3 Packet type = 0x42