Technical data

SightLine Applications Command and Control

1 Scan Eagle Aquarius

2 FLIR TAU

3 SLA Protocol (SLA-1500 at Port 0 only)

Get Port Configuration (0x3F)

Results in the generation of either a Current Port Configuration (0x53) or a Current Network

Parameters (0x49).

Byte offset Description

2 Length = 3

3 Type = 0x3F

4 Destination Port ID (see above)

Set SnapShot (0x5E)

Set up parameters for image snapshot to an FTP server or onboard MicroSD. For viewing a list of

existing files, or recording video see Set SD Card Recording Parameters (0x1E). Image is recorded

from the Camera Order 0 set by Set Video Mode (0x1F). When Image source is set to Capture, image

contents and size will be the same as the raw image from the camera. For example, if using an Analog

Video Source, the image size will be 640x480. If using a digital image from a Sony FCB-EH6300 the

image will be 1280x720. When Image Source is set to Display Image, then the image will be a

640x480 image with all the overlay graphics, digital zoom, and other image processing applied.

• Instructions to configure an FTP server are available in ApplicationNote_FileZilla.pdf.

• Instructions for formatting a MicroSD card are in

ApplicationNote_FormattingMicroSDCards.pdf

Byte offset Description

2 Packet length = 15 + userLen + passLen

3 Packet type = 0x5E

Snapshot Destination

0 FTP Server

1 Micro SD Card NEW 2.18

2 – 15 Reserved

5 Reserved, set to 0