Technical data

SightLine Applications Command and Control

SLA-2000 0 to 3 4

SLA-2100 0 and 1 2

SLA-1500 0 and 1 2

5 Video Port Types (SLA-2000/2100)

Video Port Types (SLA-1500)

6 – 7 High (pass 0 for default)

NOTE: High, Wide and Bit Depth are ignored except in Generic

Digital Mode.

8 – 9 Wide (pass 0 for default)

10 Bit Depth (pass 0 for default)

11 – 12 Vertical Front Porch in Lines (pass 0 for default) (SLA1500)

13 - 14 Horizontal Front Porch in Pixels (pass 0 for default) (SLA1500)

15 - 16 Flags – configuration parameters (pass 0 for default) (SLA1500)

Bits 0..2 Input Data Mode

0=Greyscale

1= YUV

Others = Reserved

Bit 3 Interlaced (1=interlaced)

Bit 4 VSync Polarity (1 = inverted) (for Sony 7500)

Bit 5 HSync Polarity (1 = inverted) (for Sony 7500)

Bits 6..9 Init code – calls camera initialization routine.

Called with parameters specified above in this

message

0 = no-op

1= InitSony(High)

2=InitDRS(Bit Depth)

3=InitTau(Bit Depth)

Bits 10 Use Data Valid signal (SLA-3000)

Bits 11..15 Reserved