Technical data

SightLine Applications Command and Control

Get Parameters Function (0x28)

The value of the ID field corresponds to the “Setter” of the same type. Response packets are unique

and have their own ID.

Name Header Length Type ID Checksum

Get Version Number 0x51 0xAC 0x03 0x28 0x00 0x73

Get Configuration (3000 only

) 0x51 0xAC 0x03 0x28 0x01 0x2d

Set Stabilization Parameters 0x51 0xAC 0x03 0x28 0x02 0xcf

Set Overlay Mode 0x51 0xAC 0x03 0x28 0x06 0xae

Set Tracking Parameters 0x51 0xAC 0x03 0x28 0x0C 0xd0

Set Coordinate Reporting Mode 0x51 0xAC 0x03 0x28 0x0B 0x53

Set Registration Parameters 0x51 0xAC 0x03 0x28 0x0E 0x6c

Set Video Parameters 0x51 0xAC 0x03 0x28 0x10 0xee

Set ADC Parameters 0x51 0xAC 0x03 0x28 0x18 0x2c

Set Ethernet Video Parameters

(*1)

0x51 0xAC 0x03 0x28 0x1A 0x90

Set Video Mode 0x51 0xAC 0x03 0x28 0x1F 0xaf

Set Video Enhancement Parameters 0x51 0xAC 0x03 0x28 0x21 0x0e

Set H.264 Video Parameters

(*1)

0x51 0xAC 0x03 0x28 0x23 0xb2

Set Stitch Parameters 0x51 0xAC 0x03 0x28 0x2B 0x70

Set Moving Target Detection Parameters 0x51 0xAC 0x03 0x28 0x2D 0xad

Set Blend Parameters 0x51 0xAC 0x03 0x28 0x2F 0x11

Get Image Size 0x51 0xAC 0x03 0x28 0x31 0x93

Set Ethernet Display Parameters

(*1)

0x51 0xAC 0x03 0x28 0x29 0xcc

Set SnapShot 0x51 0xAC 0x03 0x28 0x5E 0xb7

Set Parameter Block 0x51 0xAC 0x03 0x28 0x69 0x8a

Get Hardware ID 0x51 0xAC 0x03 0x28 0x50 0xa8

System Type 0x51 0xAC 0x03 0x28 0x63 0xf4

(*1)

SLA-3000 Only

SLA-3000 takes an additional parameter in the following sub commands:

• Set Ethernet Display Parameters (0x29)

• Set H.264 Video Parameters (0x23)

• Set Ethernet Video Parameters (0x1A)

The packet format is shown below: