Technical data

SightLine Applications Command and Control

Clear Flash

0 Don't clear

1 Clear flash. If a recording is in progress, it will be stopped.

2 If a file name is specified, only that file will be deleted.

6 Reserved

Get Directory

0 Don't get directory

1 Get directory information.

(See Current SD Card Directory Contents (0x59))

If a file name is specified (byte 12), it will be interpreted as

a path (SLA-1500 only?)

8 & 9 Reserved

Record Type – specified as bits, but only commands and telemetry

can be recorded together.

0x01 H.264

0x02 JPEG

0x04 Commands (file name will have .log appended)

0x08 Output Telemetry (all platforms)

0x10 Pass-through log file – log data sent by Command Pass-

through (0x3D) to an SD card file.

11 Reserved

Length of FileName or a path

Set to 0 if no label is necessary.

13...13+labelLength-1

[OPTIONAL] FileName or path name

When recording a video, file extension “.ts” is added to the file name.

This video can then be played back in VLC.

FILE NAMING:

If FileName ends with non-numeric characters, file will save to <FileName>_NNNN.ts where NNNN

is an incrementing count, starting at 0. If FileName ends with a numeric character (0-9), file will save

to <FileName>.ts

If you use

FileName...

And then Do Snap

(0x60)...

You should see... Note

Hello Hello_0000.ts Count starts at 0

Hello Hello_0001.ts Count increments

World World_0000.ts Count restarts when FileName changes