Technical data

SightLine Applications Command and Control

Flags: Types of Output

Bit Description

0x00

(DEFAULT)

Send Tracking Position and Tracking Positions of

primary track only. Same as 0x03

0x01 Send Tracking Position - sends Tracking Position

(0x43)

0x02 Send Tracking Positions of primary track – sends

Current Tracking Positions (0x51)

0x04 Send Tracking Positions of non-primary tracks –

sends Current Tracking Positions (0x51)

0x20 Prioritize Stab/Track/Telemetry over

Render/Enhance/Compress/Display. If this bit is

on and telemetry is reported every frame, the

system may skip displaying some frames so that it

can maintain 30Hz telemetry output rate. NEW

2.17

0x40 Report Tracking Box Pixel Stats (0x78) over

Track Box Area NEW 2.20

Unused Bits Reserved

6 Reserved = 0

Set Tracking Parameters (0x0C)

Set parameters used by tracking module. See also Tracking Position (0x43) .

Byte offset Description

2 Packet length = 6

3 Packet type = 0x0C

4 Size of object, in pixels, to track. (for user designated tracking)

5 Mode (see below for description).

Bits 0..3 0 = no change FIX 2.17.8

1 = Stationary mode

2 = Vehicle mode

3 = Reserved

4 = Scene mode

5..15 = Reserved

Note that if tracking mode is set to stationary, then

all moving target detection will be turned off if it is