User Guide

126E458S302 (1996)Page 6 of 7
General Assembly
Ref # Part Number Qty Description
1 747-0824 Control Handle Ass'y.
2 710-1205 Rope Guide
3 720-0279 Handle Knob 1/4 - 20 Thd.
4 710-1174 Curved Hd. Bolt 5/16 - 18 x 2" Lg.
6 720-0276 Hand Knob
7 710-0605 Oval C-Sunk Mach. Scr.
8 736-0501 Spr. Wash. .66" I.D.
9 712-0324 Hex L-Nut 1/4 - 20 Thd.
10 746-0876 Throttle Lever
11 749-0538C Upper Handle
12 720-0226 Foam Grip (Optional)
13 749-0928 Lower Handle
14 726-0240 Cable Tie
15 764-0310 Rear Catcher Frame
16 746-0550 Control Cable - 39" (450)
746-0553 Control Cable - 36" (456, 458)
746-0737 Control Cable - 51" (455)
17 746-0847 Throttle Control Wire - 42" (455)
746-0843 Throttle Control Wire - 55" (450, 456, 458)
18 764-0311 Front Catcher Frame
20 714-0104 Int. Cotter Pin 5/16" Dia.
21 732-0678 Door Spring - R.H.
22 732-0677 Door Spring - L.H.
23 782-7000 Rear Discharge Door
24 7510007755 Cable Clamp (Tec.)
751B213146 Cable Clamp (B&S)
25 646-0875 Throttle Body
26 811-00185 Throttle Box Comp. (Incl Ref. 7, 8, 9, 10, 25)
27 Engine
28 710-0871 Hex Sems Scr. #10 - 32 x .38" Lg. (Tec )
710-1237 Hex Wash. Hd. Scr. #10 - 32 x .62" Lg. (B&S)
29 735-0639 Spark Plug Boot (Optional)
30 732-0700 Wire Rod
31 731-1236 Rear Flap
32 753-0484 Blade Adapter Kit
33 710-1044 Hex Bolt 3/8 - 24 x 1.5" Lg.
34 736-0452 Bell-Wash. .39" I.D.
35 710-1055 Hex Bolt 3/8-24 x 1" Lg.
36 742-0621 21" Blade
742-0721 21" Mulching Blade (Optional)
37 736-0169 L-Wash. 3/8" I.D.
38 712-0241 Hex Nut 3/8 - 24 Thd.
39 736-0356 Bell-Wash. .39" I.D. x 1.38"
40 712-0798 Hex Nut 3/8-16 Thd.
44 738-0507B Shld. Bolt .5" Dia. x .357"
45 736-0105 Bell-Wash. .38" I.D. x .88" O.D.
46 738-0102 Axle Bolt
47 720-0190 Spring Lever Knob
48 732-0417A Spring Lever
50 14765 Pivot Bar
51 782-5002 Front Baffle
52 710-0654A Hex L-Wash. Hd. Scr. 3/8 - 16 x 1" Lg.
53 782-5003 Rear Baffle
54 710-1017 Torx Mach. AB-Tap Scr. 1/4 x .62" Lg.
55 710-0892 Hex L-Wash. Hd. AB-Tap Scr. 1/4 x .62" Lg.
56 682-0514 Handle Brkt. Ass'y. - R.H.