Technical data

BWR MTD2
INDEX
Waiver of liability
This document cannot be considered comprehensive for the purposes of: installation, operation, precautions against risks, handling
and transport. See the “General installation manual” for further information.
This document refers to standard configurations, in particular regarding dimensions, weights, electrical, refrigerant, water and air duct
connections (where applicable). For further information, drawings and diagrams contact the Climaveneta Sales Office.
Climaveneta accepts no liability deriving from the incorrect use of this document.
This publication is the sole property of Climaveneta, all reproduction, even partial, is prohibited.
The data contained in this publication may be changed without prior notice.
HFC 410ABWR_MTD2_0011_0121_201110_EN
2
This company participates in the Eurovent Certifi cation Programme.
The products are listed in the Directory of certifi ed products.
Eurovent certifi cation applied to units with cooling capacity up to 1500 kW
for air cooled water chillers and water cooled liquid chillers.
Company quality system
certified to UNI EN ISO 9001
and environmental certification
UNI EN ISO 14001
1. DESCRIPTION OF THE UNIT 3
2. ELECTRONIC CONTROLLER 5
3. OPERATING CHARACTERISTICS 6
4. ACCESSORIES 11
5. GENERAL TECHNICAL DATA 22
6. OPERATING LIMITS 34
7. ETHYLENE GLYCOL MIXTURE 35
8. FOULING FACTORS 35
9. HYDRAULIC DATA 35
10. MINIMUM AND MAXIMUM SYSTEM WATER CONTENT 36
11. HYDRONIC UNIT 37
12. PUMP CURVES 38
13. UTILITY WATER CIRCUIT CONNECTION DIAGRAM 42
CIRCUITO UTENZE
14. WATER CIRCUIT CONNECTION DIAGRAM TO THE 42
GROUND SOURCE CIRCUIT
13. ELECTRICAL DATA AT MAXIMUM CONDITIONS 43
ALLOWED (FULL LOAD)
16. FULL LOAD SOUND LEVEL 44
17. DIMENSIONAL DRAWINGS 45
18. CLEARANCES - HOISTING - SYMBOLS 46
19. OPERATING DIAGRAMS 47