Technical data
V7-T3-30 Volume 7—Logic Control, Operator Interface and Connectivity Solutions CA08100008E—January 2012 www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.3
Control Relays and Timers
EASY Intelligent Relays
Technical Data and Specifications
MFD-80, MFD-CP4, MFD-CP8
MFD I/O Modules
MFD-CP4 and CP8 Communication Modules
Note
1
Relay = 8A with resistive load, 3A with inductive load.
Transistor outputs = 0.5A/24 Vdc, maximum four outputs switchable in parallel.
Type MFD-80… MFD-CP4/CP8
Connection cables
Solid — 0.2–4.0 mm
2
(AWG 22-12)
Flexible — 0.2–2.5 mm
2
(AWG 22-12)
Degree of protection IP 65 IP 20
RFI suppression EN 55011, EN 55022 Class B, IEC 61000-6-1, 2, 3, 4 EN 55011, EN 55022 Class B, IEC 61000-6-1, 2, 3, 4
Ambient operating temperature Clearly legible at –5 to 50°C –25 to 55°C
Transport and storage temperature –40 to 70°C –40 to 70°C
Hazardous location CSA Class I, Div. 2, Groups A, B, C, D; Temp. Code T3C CSA Class I, Div. 2, Groups A, B, C, D; Temp. Code T3C
Type MFD-AC-R16 MFD-R16 MFD-RA17 MFD-T16 MFD-TA17
Supply voltage Supply via
MFD-CP8 module
Supply via
MFD-CP8 module
Supply via
MFD-CP8 module
Supply via
MFD-CP8 module
Supply via
MFD-CP8 module
Heat dissipation 0.5W 0.5W 0.5W 0.5W 0.5W
Continuous current outputs
1
8A 8A 8A 0.5A 0.5A
Short-circuit proof with
power factor 1
Line protection
B16, 600A
Line protection
B16, 600A
Line protection
B16, 600A
——
Short-circuit proof with
power factor 0.7…0.7
Line protection
B16, 600A
Line protection
B16, 600A
Line protection
B16, 600A
——
Connection cables
Solid 0.2–4.0 mm
2
(AWG 22-12) 0.2–4.0 mm
2
(AWG 22-12) 0.2–4.0 mm
2
(AWG 22-12) 0.2–4.0 mm
2
(AWG 22-12) 0.2–4.0 mm
2
(AWG 22-12)
Flexible 0.2–2.5 mm
2
(AWG 22-12) 0.2–2.5 mm
2
(AWG 22-12) 0.2–2.5 mm
2
(AWG 22-12) 0.2–2.5 mm
2
(AWG 22-12) 0.2–2.5 mm
2
(AWG 22-12)
Degree of protection IP20 IP20 IP20 IP20 IP20
RFI suppression EN 55011, EN 55022 Class B, IEC 61000-6-1,2,3,4
Ambient operating temperature –25 to 55°C –25 to 55°C –25 to 55°C –25 to 55°C –25 to 55°C
Transport and storage temperature –40 to 70°C –40 to 70°C –40 to 70°C –40 to 70°C –40 to 70°C
Mounting Snap fitted to
MFD-CP8 module
Snap fitted to
MFD-CP8 module
Snap fitted to
MFD-CP8 module
Snap fitted to
MFD-CP8 module
Snap fitted to
MFD-CP8 module
Type MFD-80… MFD-CP4-… MFD-CP8… MFD-AC-CP8…
Supply voltage Supply from -CP 24 Vdc 24 Vdc 100–240 Vac
Heat dissipation 3W 1.5W 3W 8 VA
Mounting Front mounting in 2 x 22.5 mm
Standard drill holes
Snap fitted to MFD-80 Snap fitted to MFD-80 or on top-hat rail to DIN 50022, 35 mm or screw
Mounting with ZB4-101-GF1 fixing brackets