Specifications

The icountOS
Web Interface
with its own
web page
generator.
A Parker utility that comes
as standard with IOS.
Uniquely, the IOS has its own web page
generator which means that stored
data can be downloaded or viewed
on any PC or laptop.
Utilising a computer’s web browser utility,
or for non-wifi plug in the network cable,
open the browser and enter the IOS’s unique
IP /MAC address in the navigation bar.
Connecting the WiFi
1. Ensure your IOS is powered
up and fully charged
2. Switch the IOS on by pressing
the power button and allow it to
go through the screen boot-up
sequence
3. Press the wireless switch to ON
4. Obtain the IP address from the
top of the IOS’s display. When using
a smart phone or tablet, go to the
wireless network connection setting
and ensure that the connection with
the IOS product serial number
(wireless router) is selected
from the list
5. Launch your web browser and enter
the product IP address and press GO
6. The icountOS web page should
be displayed
KEY
1. Start and Stop
data logging
2. Save data in one of
three data formats
• TXT Format
• CSV (Comma
Separated Variables)
• XML
3. Clear data
logging memory
4. List of the five
last samples taken
5. Memory usage
KEY
1. Alarm limit
settings for:
• 4µm channel (c)
• 6µm channel (c)
• 14µm channel (c)
2. Alarm limit setting for
relative humidity
3. Measurement period
4. Data logging interval
5. Unit name
6. Unit location
KEY
1. Select either the
ISO4406:1999 or
NAS1638 standard
2. Confirm the selected
standard
Data log page
Configuration page
Configuration: set report standard page
1
1
4
4
5
5
6
2
2
3
3
1
2
Configuration
10 11