Specifications

Advanced
technology,
for enhanced
performance.
Complies with the latest
industry standards
The IOS is designed in accordance with the
latest global standards including:
• CE marking
• EC Declaration of Conformity
• Machinery Directive
• EMC EN61000-6-3:2001
• EMC EN61000-6-2:2001
• EN 61010-1:2001
Quick connection
Connecting the IOS is fast and reliable. The fluid connectors are
on the front panel, with two secure push fittings: 6mm diameter
inlet and 4mm diameter outlet/ drain.
Parker can supply dedicated hoses and fittings for use with most
hydraulic and hydrocarbon fluids.
Fluid and pressure control
IOS automatically adjusts the flow rate
to an optimum level of 60ml/min. Total
range is between 40 and 140ml/min, with
maximum online operating pressure being
2.5bar (36 psi).
An optional inlet reduction valve is also
available for high pressure applications.
Long-life remote operation
The IOS uses a long life regulated 12 Vdc power supply, with
an Ml2, 4 pin connector, plus a rechargeable NiMH battery
unit for use on site or in remote locations.
Robust ‘storm’ casing
Together with a fully-sealed impact-
resistant stainless steel front panel, the
hardwearing waterproof IP54 (when open)
case provides tough, reliable protection in
the most demanding of applications.
The unit weighs under 5.5kg, making it an
ideal ‘first use’ diagnostic service tool.
High data capacity
The on-board memory provides storage
capacity for up to 250,000 sets of test
results. Data is displayed instantly, stored
or downloaded to a PC or laptop for
analysis via a standard IP68 RJ 45 patch
cord connection; a 2m cable is supplied as
standard. (File types - text, CSV or XML).
IOS WiFi Capability
The IOS uses WiFi capability as a smart
solution for effective remote control and
data log transfer from the IOS to a laptop,
mobile phone or tablet.
At 150 Mbps, the Nano router creates an
instant WiFi hotspot and is designed to
provide excellent wireless performance,
allowing the remote data transfer to
become an IOS reality. The WiFi hotspot
range is approximately 20 metres indoors
and a greater range outdoors.
• Saves time.
• Makes eld analysis simpler.
• Individual user connection.
• IOS can be set up anywhere.
• A simple and ‘smart’ solution to oil
contamination sampling.
Fast contamination detection
The IOS provides rapid detection of contaminants, with
the results being shown on the front panel mounted, high
visibility OLED digital display.
This provides easy identification of fluid condition, showing
measured codes, the sizes per channel in microns (c), the
user definable limits and moisture sensor readings as a % of
relative humidity.
Laser detection
technology
The IOS uses light obscuration, light
blockage technology. A light source is
projected through a moving column of oil.
Contaminants in the fluid interrupt the light
beam, casting images on a photo diode
cell, where the resulting change in light
intensity produces a directly proportional
change in electrical output.
Pressure reducing
valve (PRV)
A pressure compensated PRV device
(Parker Hannifin part number ACC6NN027)
has been developed to enable testing where
flow pressures in the hose exceeds 2.5 bar,
up to a maximum of 350 bar.
High Pressure Connection
Manual Connection: Press the Pressure
Reducing Valve firmly into the INLET port
Low Pressure Connection
Connect INLET (6mm Dia.) hose
Parameter Value
Working pressure range 0 to 2.5 bar
Working pressure with PRV 2.5 to 350 bar
Working viscosity 1 to 300
centistokes
Results are viewed in the OLED digital display window
6 7