Specifications

ManualsBrandsMTD ManualsLawn Mower111-064A

DEMAND-CONTROLLED

VENTILATION

Usually the input ventilation air is divided on the

basis of the size of the various rooms.

The fresh outdoor air to those rooms is really

needed. That can be achieved with demand

controlled ventilation based on occupation (CO

measurement) or time programming (clock

function). A TNO certificate of equivalence

indicates that the

EPC advantage from such a controlled demand

system is 0.072 (2-zone time control) to 0.081(2-

zone CO

control).

HOW IT WORKS

When the air quality is good, there is no need

for ventilation. The air quality deteriorates when

people are present, for instance in the living room.

In that case, first the available ventilation air will

be sent to the living room in an intelligent manner.

Only when that appears to be insufficient, the

quantity of ventilation air will be increased. That

means customised ventilation; the available

ventilation air is sent to the room where the

ventilation air is needed. A lower ventilation flow

rate means a lower energy consumption and a

lower sound level.

REMOTE CONTROL CBB

Communication between the various

components is arranged through the Zigbee

protocol. The Zigbee protocol is a wireless

communication system. All components, so also

the remote control CBB (Control Panel Brink), are

connected to a wall socket.

OPERATION

• Automatic based on presence (CO

measurement). CO

sensors determine the

ventilation air flow rate. At night, the

ventilation in the living room is reduced to the

minimum and, conversely, can be increased in

the bedrooms, without the high flow rate

causing additional noise nuisance.

• Automatic based on a time program (clock

function). A menu enables adjustment of the

control damper settings for every day.

The user can set six time blocks per day.

• Manual control. The fan setting can directly be

changed by turning the rotary knob on the

remote control CBB.

ACCESSORIES FOR BALANCED

VENTILATION WITH HEAT RECOVERY

Brink Climate Systems has developed and

selected appliance-specific accessories that can be

used to create an excellent installation. Starting

points are quality and ease of use and assembly.

I To dwelling

II To atmosphere

III From dwelling

IV From atmosphere

V Electric connections

VI Condensate discharge

KEY

Renovent HR Medium and Large 4b R

Renovent HR Medium and Large 2b/2o R

Renovent HR Small 4b R

Renovent HR Medium and Large 3b/1o R

Type A B C D E F G H I J K L M

Small 213 77 79 560 75 125 45 600 50 210 290 455 168

Medium 321 121 165 675 89 99 45 602 210 385 420 445 -

Large 336 126 165 675 89 114 53 602 220 385 430 455 -

DIMENSIONS RENOVENT HR SMALL, MEDIUM AND LARGE (IN MM)

OpenTherm

Control box

Renovent

Sleeping

zone

sensor

Damper

Control signal

Living zone