Specifications

5
“The arguments and the
comfort are convincing.”
A comfortable and
installation-friendly system
CONSTANT FLOW FANS
The heat recovery unit comes with two self-
adjusting ‘constant flow’ fans. In the selected
ventilation setting these fans keep the constant air
quantity constant under all conditions. This results
in a permanently high efficiency and initial
adjustment remains limited to the minimum. Filter
fouling does not influence the preset air quantity
either.
SETTINGS DISPLAY
The appliances come with a display for setting
and reading out functions for increased ease of
installation. A cable kit and a computer program
are available for service purposes.
3-way switch with filter indication
The filter indicator light shows when the filter
must be cleaned.
Three versions
Every dwelling deserves its own appliance.
www.brinkclimatesystems.ie
Renovent HR has been designed with a view to ease of installation in practice. For that reason
both Renovent HR Medium and Renovent HR are available in three versions: one type with all
air connections at the top, another with two connections at the top and two at the bottom, and
a third one with three connections at the top and one at the bottom. The Renovent HR Small
is available with four connections at the top. The air connections of all versions come with a
groove for sealing rings. The appliances can easily be rotated and ex factory they are available in
a right-handed and a left-handed version.
BYPASS: ADDITIONAL COMFORT
WITH NIGHT VENTILATION
In winter it is pleasant and economical to
retain heat in the dwelling. In summer on the
other hand, freshness is preferred. The Renovent
HR Medium and Large come available ex factory
with a bypass for night ventilation that shuts off
almost completely.
In summer this bypass unit ensures that cool
night air replaces in so far as possible the indoor
air that has been heated during the day. The air is
routed through the bypass unit. The appliance
comes with an automatic control system that
opens and closes the bypass valve.
SIMPLE CONTROL
The Renovent HR can be controlled in various
ways. The 3-way switch with filter indication
allows the occupant to choose the right ventilation
setting. This control can optionally be replaced by
a wireless remote control or you can opt for fully
automatic control on the basis of a humidity
and/or CO
2
sensor.