Specifications

18
Decentral ventilation with
Advance as energy-saving
solution
Optimum ease of operation
Air Heating Systems with
Brink Elan & Allure
THE ALLURE
The Allure air heater is available in three
different capacities of 4-40 kW in models with
upflow or downflow versions. The main parts of
the Allure are the heat exchanger and the burner.
The heat exchanger is made of special corrosion-
resistant stainless steel that can stand high
temperatures and the continuous temperature
changes. Moreover, the material is insensitive to
the condensation that is released when flue gases
are cooling down. The burner is also made of
stainless steel and it can be adjusted to 25% of
the maximum capacity. To prevent burner fouling,
it is placed so that no dirt can fall onto it. All these
measures result in a very long and trouble-free
service life for the Allure.
ELAN
Brink brings you a healthy and comfortable
indoor climate throughout the year. Brink has
integrated heating and ventilation in its compact
unit ‘Elan’. Brink’s heat recovery ventilation unit
‘Renovent HR’ extracts stale, damp indoor air from
the wet rooms and supplies fresh outdoor air to
the rooms.
Heat from the extracted air is transferred to the
fresh, outside air. This means draught-free
ventilation at less than 10% of traditional
ventilation costs.
OTHER BRINK PRODUCTS
DECENTRALISED VENTILATION
WITH BRINK ADVANCE
Ventilation with heat recovery has
successfully been used as energy-saving solution
for some time now. In Finland the use of balanced
ventilation has even been made mandatory for
dwellings. In response to demands from many
clients for a decentral ventilation system without
the need for extensive ducting, Brink Climate
Systems developed the Advance appliance.
Depending on the energy savings requirements,
every habitable room may be equipped with an
Advance or a hybrid solution may be opted for.
Advance is then used in spaces where comfort
(draught-free ventilation) is important in
combination with input of “fresh” air into the
bedrooms.