Specifications

Technical Specifications Renovent HR Medium
Dimension duct connection [mm] Ø 150 and Ø 160
Weight [ kg] 31 (exclusive of weight bypass unit of 3.5)
Supply voltage [V~Hz] 230/50
Protection degree IP31
Temperature efficiency [%] 95
Mode Absence Presence Cooking/showering Maximum
mode mode mode mode
Ventilation capacity [m
3
/h] 100 150 225 300
Resistance ducts system [Pa] 18 45 100 170
Rated power [W] 19 36 86 180
EPS Calculation
Brink Climate Systems has information available for correctly entering data in an EPS calculation. Please contact our Consultancy
Department.
Acoustic data Absence Presence Cooking/showering
mode mode mode
Static pressure [Pa] 40 80 160
Acoustic capacity housing emission [dB(A)] 29 38 47
Acoustic capacity duct “from" dwelling [dB(A)] <24 33 41
Acoustic capacity duct “to" dwelling [dB(A)] 49 56 66
SOUND CAPACITY LEVEL L
W
RENOVENT HR MEDIUM
Resistance ducts system [Pa]
3
/h]
= Power per fan [W]
FAN GRAPH RENOVENT HR MEDIUM
13
TECHNICAL SPECIFICATIONS RENOVENT HR MEDIUM (BOTH FOR APPLIANCE WITH AND WITHOUT BYPASS UNIT)
www.brinkclimatesystems.ie
The above acoustic data is based on the unit only and is not related to the level within the room. External noise being transmitted from outside into the dwelling is greatly
reduced in ‘airtight’ construction – as a result background noises are more noticeable. The Climate OK system incorporates acoustic measures as standard procedure. Such as,
decoupling, insulation and acoustically treated manifolds. In addition, design criteria dictates velocities of around 2,5m/s in the tributary ducts. A Climate OK installation has a
targeted system noise level of +/- 29,5dB(A). This figure can be further reduced with additional acoustic treatment if specified.