Specifications

Resistance ducts system [Pa]
3
/h]
= Power per fan [W]
TECHNICAL SPECIFICATIONS RENOVENT HR LARGE (BOTH FOR APPLIANCE WITH AND WITHOUT BYPASS UNIT)
Technical Specifications Renovent HR Large
Dimension duct connection [mm] Ø 160 and Ø 180
Weight [ kg] 32 (exclusive of weight bypass unit of 3.5)
Supply voltage [V~Hz] 230/50
Protection degree IP31
Temperature efficiency [%] 95
Mode Absence Presence Cooking/showering Maximum
mode mode mode mode
Ventilation capacity [m
3
/h] 100 200 300 400
Resistance ducts system [Pa] 10 40 83 150
Rated power [W] 20 56 136 304
EPS Calculation
Brink Climate Systems has information available for correctly entering date in an EPS calculation. Please contact our Consultancy
Department.
Acoustic data Absence Presence Cooking/showering
mode mode mode
Static pressure [Pa] 40 80 240
Acoustic capacity housing emission [dB(A)] <32 42 53
Acoustic capacity duct “from" dwelling [dB(A)] <31 38 47
Acoustic capacity duct “to" dwelling [dB(A)] 51.5 62 69
SOUND CAPACITY LEVEL L
W
RENOVENT HR LARGE
12
www.brinkclimatesystems.ie
The above acoustic data is based on the unit only and is not related to the level within the room. External noise being transmitted from outside into the dwelling is greatly reduced in ‘airtight’
construction – as a result background noises are more noticeable. The Climate OK system incorporates acoustic measures as standard procedure. Such as, decoupling, insulation and acoustically
treated manifolds. In addition, design criteria dictates velocities of around 2,5m/s in the tributary ducts. A Climate OK installation has a targeted system noise level of +/- 29,5dB(A). This figure
can be further reduced with additional acoustic treatment if specified.
FAN GRAPH RENOVENT HR LARGE