Warranty

6. Attach one end of the long extension spring (found inthe
hardware pack) to the idler pulley bracket and the other
end to the tractor’s frame rail. See Figure 3-7 and Figure
3-8.
Figure 3-7
Figure 3-8
900-Series
Some 900-series tractors have a deck anti-sway rod that must be
removed prior to mounting the snow thrower undercarriage.
7. Remove the shoulder bolt and flange nut that secures the
left deck lift arm to the tractors frame. Remove the flange
nut that secures the anit-sway rod to the left deck lift arm.
See Figure 3-9.
8. The right side of the anti-sway rod is secured by either a
hairpin clip or a flange nut. Remove whichever is present
and store the anti-sway rod and hardware in a safe place.
See Figure 3-10.
Figure 3-9
Figure 3-10
8 Section 3— ASSembly & Set-Up