Warranty

WARNING! Before installing attachment, place

tractor on a firm and level surface. Place the PTO in

the disengaged (OFF) position, set the parking

brake, shut engine off and remove key to prevent

unintended starting.

NOTE: References to LEFT and RIGHT indicate the left and

right sides of the tractor when facing forward in the operator’s

position. Reference to the FRONT indicates the grille end; to the

REAR the drawbar end.

Several components on your tractor must be removed prior to

mounting the snow thrower attachment. Refer to Deck Removal

in your tractor’s Operator’s Manual for detailed instructions. If

your tractor is equipped with any front-end accessory (i.e. front

bumper kit), it must also be removed.

Assembly

If you engage your tractor’s cutting deck by using your right

hand to pivot a lever forward, your tractor has a Manual PTO. If

you engage your tractor’s cutting deck by pulling outward on

a small knob located on the tractor’s dash, your tractor has an

Electric PTO. Follow applicable instructions.

Models with an Electric PTO

1. Attach one end of the short extension spring (found in the

hardware pack) to the hole in the idler assembly. Mount the

opposite end of the extension spring to the slotted fitting

as illustrated in Figure 3-1.

Models with a Manual PTO

1. Position the undercarriage on the floor beneath your

tractor close to the PTO cable. The small idler pulley should

be pointed towards the front of your tractor.

2. Attach the spring on the end of the PTO cable to the idler

bracket, then fit the cable into the slotted fitting and

secure it in place with the hairpin clip as shown in Figure

3-2.

Figure 3-1

Figure 3-2

Contents of Carton

• One Auger Housing Assembly • One Upper Chute Crank Rod • Operator’s Manual

• One Lift Handle Assembly • One Undercarriage Assembly • Two Self-adhesive Reflectors

• One Hardware Pack

Contents of Hardware Pack

• Two Quick Release Pins • One Short Extension Spring • One Long Extension Spring

• Three Cable Ties • Two Shoulder Bolts & Lock Nuts

Assembly & Set-Up