Replacement Part List

3. Align the holes in the rear of the lift arms with the

holes in the rear of the undercarriage and insert the

clevis pins removed in step 1. Fasten with the hairpin

clips. See Figure 14.

5. Move the tractor’s deck lift lever into the top notch on

the right fender allowing the lift arms and the rear of

the undercarriage assembly to rise.

6. Insert the weldpins found on the top side of the rear

portion of the undercarriage assembly up through the

aligning holes found along the tractor’s frame rail. See

Figure 15.

7. Fasten with the hairpin clips removed in step 1.

8. Repeat the previous two steps on the front portion of

the undercarriage assembly.

9. Connect the extension spring to the tractor’s frame rail

in the hole provided. See Figure 16.

NOTE: Refer to the Routing the Upper Drive Belt

section of this manual for proper upper drive belt

installation instructions. Routing The Lower Drive Belt

instructions can also be found in that section.

Before installing

attachment, place

tractor on a firm

and level surface.

Place the PTO in

the disengaged

(OFF) position, set

the parking brake,

shut engine off and

remove key to prevent

unintended starting.

Assembly

Model Series

600-649 &

All 800 series.

WARNING

Figure 14

Lift Arm

Clevis Pins

Figure 15

Figure 16